Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Design M 18 x 1
• Metal enclosure
• DC 4-wire
• Long design

 
 
Ordering details
 
Product type descriptionIFL 8-18L-10P - Ordering suffix
Article numberIFL 8-18L-10P
EAN Code
eCl@ss27-27-01-01
 
Approval
 
Approval CCC
 
Global Properties
 
Permanent lightIFL - M18
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classNone
Materials
- Material of the housingsBrass
- Material of the nutsBrass
- Material of the cable mantlePVC
- Material of the active surfacePlastic
Housing coatingnickel-plated
Housing construction formcylinder, thread
 
Mechanical data
 
Design of electrical connectionCable
Cable length2
Conductor with strain reliefNo
Conductors4 x 0,25
mechanical installation conditionsnot flush
Switch distance Sn8 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 24 max. 1800 Ncm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of wire4
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage60
Switch frequencyapprox. 350 HZ
Voltage drop Udapprox. 1.5 V (400 mA)
Operating current Ie400 mA
No-load current I0approx. 5.5 mA (24 V)
 
Outputs
 
Design of control outputPNP
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor79
- Diameter of sensorM18
 
notice
 
Instead of nuts, a mounting clamp can be provided.
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: IFL 8-18L-10P-1665-1
...-1665-1 short-circuit and overload proof
Operating current Ie: 300 mA
Voltage drop Ud: approx. 1 V (300 mA)


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 24.04.2019 - 01:35:35h Kasbase 3.3.0.F.64I