Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Ex certified
• Metal enclosure
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 30 mm x 63,5 mm x 30 mm
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50047
• Ex-certified screwed cable gland
• 1 Cable entry M 20 x 1.5
• Lever angle adjustable in 10° steps

 
 
Ordering details
 
Product type descriptionEX-TV14H 235-11Z-3D - Ordering suffix
Article numberEX-TV14H 235-11z-3D
EAN Code
eCl@ss27-27-26-01
 
Approval
 
Approval EEX
 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)20.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightEX-T 235 Rollenschwenkhebel 14H
StandardsEN 60947-5-1, EN 60079-0, EN 60079-15, EN 60079-31, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
Materials
- Material of the housingsZink
- Lever materialMetal film
- Roller materialPlastic
- Material of the contactsSilver
Housing coatingpainted
Housing construction formNorm construction design
Weight
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable cross-section of the cable glands
- Min. Cable cross-section of the cable glands6
- Max. Cable cross-section of the cable glands12
Cable section
- Min. Cable section0,75
- Max. Cable section2.5
AWG-Number13
Mechanical life20.000.000 operations
Switching frequencymax. 5000 /h
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRoller lever
actuating torquemin. 15 Ncm
Bounce durationin accordance with actuating speed
Switchover timein accordance with actuating speed
Positive break torque18.5
Actuating speed with actuating angle 30° to switch axis
- Min. Actuating speed4122 mm/min
- Max. Actuating speed1 m/s
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−20
- Max. environmental temperature+60
Protection classIP67
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
- positive break NC contact
Number of auxiliary contacts1
Number of safety contacts1
Rated impulse withstand voltage Uimp6 kV
Rated insulation voltage Ui500 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 1 A
Max. fuse rating6 A gG D-fuse
 
ATEX
 
MarkingEX II 3D Ex tc IIIC T90°C Dc X
EX II 3G Ex nC IIC T5 Gc X
Explosion protection categories for gases3G
Explosion protection Zones for gases2
Explosion protected category for dusts3D
Explosion protection Zones for dusts22
 
Dimensions
 
Dimensions of the sensor
- Width of sensor30
- Height of sensor114
- Length of sensor46
 
Keywords
 
KeywordsEx, EEx, ATEX, Ex 235, Ex 235, 235 Ex, 235ex, 235ex, ATEX 235
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: EX-TV14H 235-11Z-3D-Z
...-Z Actuator head gasket

...-RMS Available with metal roller


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 22.02.2019 - 18:05:00h Kasbase 3.3.0.F.64I