Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
 Add Product to the basket. 
EX-T4V7H 355-02ZH-3G/D
• Metal enclosure
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• Actuator heads can be repositioned by 4 x 90°
• Including Ex-certified screwed cable gland and screw plug
• Mounting details to EN 50041
• 3 cable entries M 20 x 1.5
• Ex certified
only for positioning tasks

 
 
Ordering details
 
Product type descriptionEX-T4V7H 355-02ZH-3G/D - Ordering suffix
Article numberEX-T4V7H 355-02ZH-3G/D
EAN Code
eCl@ss27-27-26-01
 
Approval
 
Approval
 
Classification
 
StandardsISO 13849-1
Mission time20 Years
notice
 
Global Properties
 
Permanent lightEX-T 355 Rollenschwenkhebel 7H
StandardsIEC 60947-5-1, EN 60079-0, EN 60079-15, EN 60079-31, BG-GS-ET-15
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)No
Materials
- Material of the housingslight alloy die-casting
- Lever materialMetal film
- Material of the contactsSilver
- Roller materialPlastic
Housing coatingpainted
Housing construction formNorm construction design
Weight
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable cross-section of the cable glands
- Min. Cable cross-section of the cable glands7
- Max. Cable cross-section of the cable glands12
Cable section
- Min. Cable section0,75
- Max. Cable section2.5
AWG-Number13
Mechanical life30.000.000 operations
Switching frequency5000
noticeAll indications about the cable section are including the conductor ferrules.
Design of actuating elementRoller lever
actuating torque31
Bounce duration< 2
Switchover timein accordance with actuating speed
Impact energy1
Actuating speed with actuating angle 30° to switch axis
- Min. Actuating speed
- Max. Actuating speed2.5
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−20
- Max. environmental temperature+60
Protection classIP67
 
Electrical data
 
Design of control elementOpener (NC)
Switching principleSlow action with staggered contacts
- positive break NC contact
Number of auxiliary contacts0
Number of safety contacts2
Rated impulse withstand voltage6
Rated insulation voltage500
Thermal test current10 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 1 A
Max. fuse rating6 A gG D-fuse
 
ATEX
 
EX-markingEX II 3G Ex nC IIC T5 Gc X, EX II 3D Ex tc IIIC T90°C Dc X
Explosion protection categories for gasesATEX gas ex-protection, Cat. 3
Explosion protection Zones for gases2
Explosion protected category for dustsATEX dust ex-protection, Cat. 3
Explosion protection Zones for dusts22
 
Dimensions
 
Dimensions of the sensor
- Width of sensor40.5
- Height of sensor183
- Length of sensor57.25
 
Keywords
 
KeywordsEx, EEx, ATEX, Ex 235, Ex 235, 235 Ex, 235ex, 235ex, ATEX 235
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: EX-T4V7H 355-02ZH-3G/D-1297
...-1297 Enclosure with transverse slotted holes

...-1637 0,3 µm gold-plated contacts


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 24.02.2019 - 02:32:15h Kasbase 3.3.0.F.64I