Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• With pre-wired cable
• Actuation from side
• without bias magnet

 
 
Ordering details
 
Product type descriptionBN 650-10Z/1
Article numberBN 650-10Z/1
EAN Code
eCl@ss27-27-01-04
 
Global Properties
 
Permanent lightBN 650
suitable for elevators (Y/N)No
Weight65
Recommended actuatorBP 10, 2 x BP 10, BP 15, 2 x BP 15, 2 x BP 15/2, BP 34, BP 20, BP 31, BP 11, BP 12, BP 21
 
Mechanical data
 
Design of electrical connectionCable
Cable length1
Conductors2 x 0,75
AWG-Number18
Switching frequency300/
Actuating planesActuation from side
Active arealateral
Switch distance5 … 50
BP 10 = 5 mm
2 x BP 10 = 17 mm
BP 15 = 6 mm
2 x BP 15 = 17mm
2 x BP 15/2 = 17 mm
BP 34 = 15 ... 20 mm
BP 20 = 20 mm
BP 31 = 20 mm
BP 11 = 20 mm
BP 12 = 10 … 30 mm
BP 21 = 25 ... 50 mm
- noticeActuating distance up to 50 mm depending on actuating magnet and version
Bounce duration0,3 … 0,6
Latching (Y/N)No
bias magnet (Y/N)No
Switching point accuracy± 0,25 mm
 
Ambient conditions
 
Protection classIP67
 
Electrical data
 
Design of control elementOpener (NC)
Number of shutters1
Number of openers0
Voltage type
Switching voltage200
Switching current1 A
Switching capacity30 /
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.09.2019 - 07:26:07h Kasbase 3.3.0.F.64I