Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Thermoplastic enclosure
• slender shock-proof enclosure
• to be fitted to commercial-off-the-shelf aluminium profiles
• to be installed at an ergonomic favourable position
• large range of Illuminated pushbuttons, Selector switches, LED indicator lights, Key-operated selector switches and Emergency-Stop buttons
• Integrated AS-Interface Safety Slave for emergency stop and A/B Slave for command and signalling devices
• Emergency stop, on/off and reset functions available
• Two-layer plastic identification labels can be used (engravements on request)
• AS-Interface M12 connector Optional bottom or above
• Suitable for AS-i Power24

Ordering details
Product type descriptionBDF200AS
Article numberBDF200AS
noticesee ordering code
Approval TÜV
StandardsEN ISO 13849-1, IEC 61508
PLup e
Control categoryup 4
PFH value1.4 x 10−8 /h
- noticeup to max. 5.000 switching cycles/year
SILup 3
Mission time20 Years
Global Properties
Permanent lightBDF200AS
StandardsEN 60947-5-1, EN ISO 13850, EN ISO 13849-1, IEC 61508, EN 50295
Climatic stressto DIN EN 60068
Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
Positions used
- Position 1Command device (see ordering code)
- Position 2Command and signalling devices (see ordering code)
- Position 3Command and signalling devices (see ordering code)
- Position 4Command and signalling devices (see ordering code)
Response time< 100
Mechanical data
Cable entry1x M12
Mechanical life
- Emergency-Stop button100.000 operations
- Command devices1.000.000 operations
restistance to shock15 g / 11 ms
Resistance to vibration10 … 150 HZ, Amplitude 0,35 mm / 5 g
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+65
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Protection classIP65
Protection ratingII, Double-insulated
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp800 V
- Rated insulation voltage Ui32 VDC
- Overvoltage categoryIII
- Degree of pollution3
Electrical data - AS interface
AS-i Supply voltage18 … 31.6 VDC, Protection against polarity reversal
- Min. supply voltage18
- Max. supply voltage31.6
AS-i operating current≤ 150
- AS electronics
- Total
AS-i Device insulationinternally short-circuit proof
AS-i SpecificationSafety Slave
- versionV 3.0
- ProfileS-7.B.F.F
AS-i Inputs
- Channel 1Data bits DI 0/DI 1= dynamic code transmission
- Channel 2Data bits DI 2/DI 3= dynamic code transmission
AS-i Outputs
- DO 0Indicator lamp G24 red
- DO 1Indicator lamp G24 green
- DO 2not used
- DO 3not used
AS-i Parameter bitsP0 … P3 not used
AS-i SpecificationA/B slave
- versionV 3.0
- ProfileS-7.A.7.F
AS-i Inputs
- DI 0Command device Position 4
- DI 1Command device Position 3
- DI 2Command device Position 2
- DI 3Command device Position 2
AS-i Outputs
- DO 0Illuminated signal Position 4
- DO 1Illuminated signal Position 3
- DO 2Illuminated signal Position 2
- DO 3not used
AS-i Parameter bitsP0 … P3 not used
POnot used
P1not used
P2not used
P3not used
AS-i input module address0
- Default on address 0, programmable via the AS-Interface Master or Hand-held programming device
noticeBoth AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.
LED switching conditions display
LED switching conditions display (Y/N)No
- Width40 mm
- Height69 mm
- Depth233.5 … 252.5 mm (without and with Indicator lamp)
Pin assignment
1AS interface +
3AS interface −

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.07.2019 - 18:34:51h Kasbase 3.3.0.F.64I