Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Solenoid interlock  ->  AZM201  ->  AZM201Z-I2-ST2-T-1P2PW-A
 Add Product to the basket. 
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Suitable for hinged and sliding guards
• Intelligent diagnosis
• Manual release
• Repeated individual coding with RFID technology
• Coding level "High" according to ISO 14119
• Power to lock
• Guard locking monitored

Ordering details
Product type descriptionAZM201Z-I2-ST2-T-1P2PW-A
Article number103013489
EAN Code4030661493329
Approval TÜV
Interlocking function:
StandardsEN ISO 13849-1, IEC 61508, IEC 62061
Control category4
PFH value1.9 x 10−9 / h
PFD value1.6 x 10−4
SILSuitable for SIL 3 applications
Mission time20 Years
Guard locking function:
StandardsISO 13849-1, IEC 61508, IEC 62061
Control category2
PFH value1.0 x 10−8 / h
PFD value8.9 x 10−4
SILSuitable for SIL 3 applications
Mission time20 Years
Global Properties
Permanent lightAZM201
StandardsIEC 60947-5-1, IEC 60947-5-3, ISO 14119, ISO 13849-1, IEC 61508, IEC 62061
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
Protection ratingIII
Series-wiringup to 31 components
Length of the sensor chain200 m
Active principleRFID
Duty cycle100
Coding levels according to ISO 14119High
CodingIndividual coding, multiple teaching
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
Housing coatingNone
Guard locking monitored (Y/N)Yes
Actuator monitored (Y/N)No
Idle assignable pushbutton and LED (Y/N)No
Response time
Actuator≤ 100
Duration of risk< 200
Time to readiness< 4000
Recommended actuatorAZ/AZM201-B1, AZ/AZM201-B30
- Actuator≤ 100 ms
- Inputs≤ 0,5 ms
Mechanical data
Design of electrical connectionConnector M12, 8-pole
Cable section
- Min. Cable section
- Max. Cable section
Mechanical life≥ 1.000.000 operations
restistance to shock30 / 11
Resistance to vibration10 … 150 HZ, Amplitude 0,35 mm
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Clamping force2000
Max. Actuating speed≤ 0,2
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Relative humidity30… 95
- non-condensing
Protection classIP66, IP67 to IEC 60529
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage0,8
- Overvoltage categoryIII
- Degree of pollution3
Electrical data
Number of auxiliary contacts0
Number of safety contacts2
Cross circuit/short circuit recognition possible (Y/N)Yes
Power to unlockNo
Power to lockYes
Supply voltage
- Min. supply voltage20.4 V DC
- Max. supply voltage26.4 V DC
Switch frequency1
Rated insulation voltage32 V DC
Operating current1.2 A
Utilisation categoryDC-13
No-load current0,6 A
Device insulation≤ 2 A
Electrical data - Safety inputs
Safety inputsX1 and X2
Rated operating voltage-3 … 5 (Low)
15 … 30 (High)
Operating currenttypically 2 at 24
Electrical data - Safety outputs
Safety outputsY1 and Y2
Fuse ratingshort-circuit proof, p-type
Rated operating voltage0 … 4 under
Residual current≤ 0,5
Operating currentmax. each 0,25 A
Utilisation categoryDC-13
Electrical data - Diagnostic output
Serial diagnostics (Y/N)No
Fuse ratingp-type, short-circuit proof
Operating current0,05 A
Utilisation categoryDC-13: 24 V / 0,05 A
Wiring capacitance for serial diagnostics-
diagnostic signalsguard door closed and interlocking device locked
Operating principle of the diagnostic outputThe short-circuit proof diagnostic output OUT can be used for central visualisation or control tasks, e.g. in a PLC.
noticeThe diagnostic output is not a safety-relevant output!
Electrical data - Solenoid control IN
Rated operating voltage Ue-3 V … 5 V (Low)
15 V … 30 V (High)
Operating current Ietypically 10 mA at 24 V, dynamically 20 mA
Control command
LED switching conditions display
LED switching conditions display (Y/N)Yes
LED switching conditions display
- Supply voltagegreen LED
- switching conditionyellow LED
- Error functional defectred LED
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor40 mm
- Height of sensor220
- Length of sensor50
Pin assignment
1A1 Supply voltage UB
2X1 safety input 1
4Y1 safety output 1
5OUT diagnostic output
6X2 safety input 2
7Y2 safety output 2
8IN solenoid control
As lons as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. The safety outputs then will be enabled again; opening the safety guard therefore is not required.
Included in delivery
Included in deliveryAZM201
Triangular key
Actuators must be ordered separately.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.09.2019 - 01:08:39h Kasbase 3.3.0.F.64I