Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• STOP 0 Function
• 1 oder 2-channel control
• Start button / Auto-start
• 3 safety contacts
• 1 Auxiliary contact

Ordering details
Product type descriptionSRB-E-301ST
Article number103007672
EAN code
Relay outputs
StandardsEN ISO 13849-1, IEC 61508, IEC/EN 62061
PLup e
Control categoryup 4
CCF> 65 points
PFH value≤ 1.25 x 10−8/h
PFD value≤ 5.3 x 10−5
SILup 3
Mission time20 Years
Semi-conductor outputs
Control category
PFH value
PFD value
Mission time
Global Properties
Product nameSRB-E-301ST
StandardsIEC/EN 60204-1, EN 60947-5-1, EN ISO 13849-1, IEC 61508, IEC/EN 62061
Compliance with the Directives (Y/N) Yes
Mountingsnaps onto standard DIN rail to EN 60715
Terminal designationsIEC/EN 60947-1
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, ventilated
- Material of the contacts, self-cleaning, positive action
Weight175 g
Start conditionsAutomatic or Start button (Optional monitored)
Start input (Y/N)Yes
Feedback circuit (Y/N)Yes
Start-up test (Y/N)No
Automatic reset function (Y/N)Yes
Reset with edge detection (Y/N)Yes
Pull-in delay
- ON delay with automatic start< 150
- ON delay with reset button< 150
Drop-out delay
- Drop-out delay in case of power failure< 10
- Drop-out delay in case of emergency stop< 10
Mechanical data
Connection typeScrew connection, plug-in
Cable section
- Min. Cable section0,25 mm²
- Max. Cable section2.5 mm²
Pre-wired cablerigid or flexible
Tightening torque for the terminals0,5 Nm
Detachable terminals (Y/N)Yes
Mechanical life10.000.000 operations
Electrical lifetimeDerating curve available on request
restistance to shock30 / 11
Resistance to vibration To EN 60068-2-610…55 HZ, Amplitude 0,35 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−40
- Max. Storage and transport temperature+85
Protection class
- Protection class-EnclosureIP40
- Protection class-TerminalsIP20
- Protection class-ClearanceIP54
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage6 / 4
Overvoltage categoryIII
- Degree of pollution2 To IEC/EN 60664-1
Electromagnetic compatibility (EMC)
EMC ratingconforming to EMC Directive
Electrical data
Rated DC voltage for controls
- Min. rated DC voltage for controls19.2 V
- Max. rated DC voltage for controls28.8 V
Rated AC voltage for controls, 50 Hz
- Min. rated AC voltage for controls, 50 Hz19.2 V
- Max. rated AC voltage for controls, 50 Hz28.8 V
Rated AC voltage for controls, 60 Hz
- Min. rated AC voltage for controls, 60 Hz19.2 V
- Max. rated AC voltage for controls, 60 Hz28.8 V
Contact resistancemax. 100 mΩ
Power consumption2.4 W; 7 VA
Type of actuationDC
Switch frequencymax. 0,3 Hz
Rated insulation voltage Ui250 V
Rated operating voltage Ue24 VDC −20% / +20%, residual ripple max. 10%
Operating current Ie0,1 A
Frequency range50 / 60 Hz
Electronic protection (Y/N)No
Fuse rating for the operating voltageWe recommend a Z type circuit breaker (max. 16 A) either a fine-wire fuse (max. 15A, slow-blow)
Bridging in case of voltage drops5
Cyclic outputs> 20 VDC, 10 mA for each output
Control inputs24 VDC / 8 mA
Monitored inputs
- Short-circuit recognition (Y/N)Yes
- Wire breakage detection (Y/N)Yes
- Earth connection detection (Y/N)Yes
Number of shutters1
Number of openers2
Cable length1500 with 1.5 ;
2500 with 2.5
Conduction resistance40
Stop category0
Number of safety outputs0
Number of safety contacts3 x STOP 0
Number of auxiliary contacts1 x STOP 0
Number of signalling outputs0
Relay outputs
Switching capacity of the safety contacts250 , 6 A ohmic
10 / 10
(inductive in case of appropriate protective wiring)
Protection of the safety contactsSafety fuse 10 A quick-blow, 6 A slow blow
Utilisation categoryAC-15: 230 V / 4 A
DC-13: 24 V / 4 A
Switching capacity of the auxiliary contacts24 , 1 A
Fuse rating for the auxiliary contacts2.5 A quick-blow, 2 A slow blow
Semi-conductor outputs
Switching capacity of the safety outputs
Voltage drop
Residual current
Test impulse width
Fuse rating for the safety outputs
Utilisation category
Switching capacity of the signaling/diagnostic outputs
Fuse rating for the signaling/diagnostic outputs
LED switching conditions display
LED switching conditions display (Y/N)Yes
Number of LED´s5 piece
Miscellaneous data
Applications Emergency-Stop button
Pull-wire emergency stop switches
Safety light barriers
Safety light curtain
Safety sensor
hinged safety guard
- Width22.5
- Height98
- Depth115

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 21.08.2019 - 19:58:45h Kasbase 3.3.0.F.64I