| |
|
Ordering details |
|
Product type description | PS116-T12-ST-K250 |
Article number | 103006667 |
EAN Code |
eCl@ss | 27-27-26-01 |
|
Approval |
|
Approval | 

 |
|
Classification |
|
Standards | ISO 13849-1 |
B10d Normally-closed contact (NC) | 20.000.000 |
Mission time | 20 Years |
notice |  |
|
Global Properties |
|
Permanent light | PS116 Winkelhebel K250 |
Standards | IEC 60947-5-1 |
Compliance with the Directives (Y/N)  | Yes |
Suitable for safety functions (Y/N) | Yes |
Materials |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated |
- Material of the contacts | Silver |
Housing coating | None |
Housing construction form | Norm construction design |
Weight | 70 g |
|
Mechanical data |
|
Design of electrical connection | Connector M12, 6-pole |
Connector | bottom |
Mechanical life | 10.000.000 operations |
Switching frequency | max. 5000 /h |
Design of actuating element | Angle roller lever K250 |
Actuating force | min. 6 N |
Bounce duration | < 3 ms |
Switchover time | < 5.5 ms |
Positive break force | 40 N |
Actuating speed for vertical actuation |
- Min. Actuating speed | 264 mm/min |
- Max. Actuating speed | 1 m/s |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −30 °C |
- Max. environmental temperature | +80 °C |
Protection class | IP66, IP67 |
|
Electrical data |
|
Design of control element | Normally open contact (NO), Opener (NC) |
Switching principle | Creep circuit element |
- positive break NC contact  |
Number of auxiliary contacts | 1 piece |
Number of safety contacts | 2 piece |
Rated impulse withstand voltage Uimp | 0,8 kV |
Rated insulation voltage Ui | 30 V |
Thermal test current Ithe | 2 A |
Utilisation category | DC-13: 24 V / 1,5 A |
Required rated short-circuit current | 1000 A |
Max. fuse rating | 6 A gG D-fuse (quick-blow) |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Dimensions |
|
Dimensions of the sensor |
- Width of sensor | 31 mm |
- Height of sensor | 95.5 mm |
- Length of sensor | 16.6 mm |
Roller diameter | 22 mm |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
Switch travel diagram |
|

Notes Switch travel diagram
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
|
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
18.02.2019 -
00:35:33h Kasbase 3.3.0.F.64I |