Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Thermoplastic enclosure
• Symmetric enclosure
• Lever angle adjustable in 15° steps
• Protection class IP66, IP67
• Actuator heads can be repositioned by 8 x 45°
• length adjustable in 2 mm steps
• Pre-wired cable bottom, 2
• Snap action 1 Normally open contact (NO) / 1 Opener (NC)

 
 
Ordering details
 
Product type descriptionPS116-Z11-L200-N200
Article number103006646
EAN Code
eCl@ss27-27-26-01
 
Approval
 
Approval

 
Classification
 
StandardsISO 13849-1
B10d Normally-closed contact (NC)20.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightPS116 Rollenschwenkhebel N200
StandardsIEC 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated
- Material of the contactsSilver
Housing coatingNone
Housing construction formNorm construction design
Cable colourGrey
Cable typeLiYY
Weight210 g
 
Mechanical data
 
Design of electrical connectionCable, 4-pole
Connectorbottom
Conductors4 x 0,5 mm²
Mechanical life10.000.000 operations
Switching frequencymax. 5000 /h
Design of actuating elementRoller lever N200
Actuating forcemin. 15 Ncm
Bounce duration< 3 ms
Switchover time< 5.5 ms
Positive break force60 Ncm
Actuating speed for vertical actuation
- Min. Actuating speed240 mm/min
- Max. Actuating speed1 m/s
Cable length2 m
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−30 °C
- Max. environmental temperature+80 °C
Protection classIP66, IP67
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleSnap switch element
- positive break NC contact
Number of auxiliary contacts1 piece
Number of safety contacts1 piece
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui300 V
Thermal test current Ithe5 A
Utilisation categoryAC-15: 240 V / 3 A,
DC-13: 24 V / 1,5 A
Required rated short-circuit current1000 A
Max. fuse rating6 A gG D-fuse (quick-blow)
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor31 mm
- Height of sensor139 mm
- Length of sensor16.6 mm
Roller diameter20 mm
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 19.06.2019 - 14:53:15h Kasbase 3.3.0.F.64I