Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Compact Safety-Input module
• Integrated in the passive junction
• for 2 potential-free NC contacts
• Protection class IP67

Ordering details
Product type descriptionASIM-C-M12-4P-0,5M
Article number103004694
EAN Code

StandardsEN ISO 13849-1, EN 62061
Control category4
PFH valueNo significant contribution
PFD valueNo significant contribution
Mission time20 Years
Global Properties
Permanent lightASIM-C-M12
StandardsEN 50295, EN 60204-1, EN ISO 13849-1, EN 62061
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
- Material of the housingsThermoplastic PBT
- Material of the cablePolyurethane
Response time< 1
Duration of risk< 5
Mechanical data
Design of electrical connectionSocket, M12, 4-pole, A-coded
Cable length0,5
restistance to shock30 / 11
Resistance to vibration10 … 57 HZ, Amplitude 0,75 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature−20
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+80
Relative humidity30 … 95
- non-condensing, non-icing
Protection classIP67 to IEC/EN 60529
Protection ratingIII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage0,8
- Rated insulation voltage32
- Overvoltage categoryIII
- Degree of pollution3
Electrical data - AS interface
AS-i Supply voltage26.5 … 31.6 VDC, Protection against polarity reversal
AS-i operating current≤ 90
AS-i Device insulationinternally short-circuit proof
AS-i Specification
- versionV3.0
- ProfileS-0.B.F.0
AS-i Inputs
- Channel 1Data bits DI 0/DI 1= dynamic code transmission
- Channel 2Data bits DI 2/DI 3= dynamic code transmission
AS-i Outputs
- DO 0not used
- DO 1 ... DO 3not used
AS-i Parameter bits
- P0Communication monitoring
- P1 ... P3not used
AS-i input module address0
- Default on address 0, programmable via the AS-Interface Master or Hand-held programming device
noticeSet the parameter outputs to "1111" (0xF)
LED switching conditions display
LED switching conditions display (Y/N)Yes
AS-i LED switching conditions display
(1) green LEDSupply voltage / slave address = 0
(2) red LEDCommunication error / slave address = 0
(3) yellow LEDI1 = Status Safety input 1
(4) yellow LEDI2 = Status Safety input 2
(5) yellow LED-
- Width27.7
- Height40.5
- Depth22

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 15.09.2019 - 20:56:50h Kasbase 3.3.0.F.64I