| | |
| |
| Ordering details |
| |
| Product type description | BDF200-ST1-AS-NHK-LTWH-LTBU-LTWH |
| Article number | 101215280 |
| EAN Code |
| eCl@ss | 27-37-12-02 |
| |
| Approval |
| |
| Approval |  TÜV
 USA/CAN
 AS-i |
| |
| Classification |
| |
| Standards | EN ISO 13849-1, IEC 61508 |
| PL | up e |
| Control category | up 4 |
| PFH value | 1.4 x 10−8 /h |
| - notice | up to max. 5.000 switching cycles/year |
| SIL | up 3 |
| Mission time | 20 Years |
| |
| Global Properties |
| |
| Permanent light | BDF200AS (Vorzugstypen) |
| Standards | EN 60947-5-1, EN ISO 13850, EN ISO 13849-1, IEC 61508, EN 50295 |
| Climatic stress | to DIN EN 60068 |
| Material of the housings | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Weight | 280 |
| Positions used |
| - Position 01 | Emergency stop latching pushbutton, with Protective collar |
| - Position 02 | Illuminated pushbutton, White |
| - Position 03 | Illuminated pushbutton, Blue |
| - Position 04 | Illuminated pushbutton, White |
| Response time | < 100 |
| |
| Mechanical data |
| |
| Design of electrical connection | connector plug M12, 4-pole, bottom |
| Mechanical life |
| - Emergency-Stop button | 100.000 operations |
| - Command devices | 1.000.000 operations |
| restistance to shock | 15 g / 11 ms |
| Resistance to vibration | 10 … 150 HZ, Amplitude 0,35 mm / 5 g |
| Indicator lamp (Y/N) | No |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +65 |
| Storage and transport temperature |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Protection class | IP65 |
| Protection rating | II, Double-insulated  |
| Overvoltage category | III |
| Degree of pollution | 3 |
| |
| Electrical data - AS interface |
| |
| AS-i Supply voltage | 18 … 31.6 VDC, Protection against polarity reversal |
| - Min. supply voltage | 18 |
| - Max. supply voltage | 31.6 |
| AS-i operating current | ≤ 150 |
| - AS electronics |
| - Total |
| AS-i Device insulation | internally short-circuit proof |
| AS-i Specification | Safety Slave |
| - version | V 3.0 |
| - Profile | S-7.B.F.F |
| AS-i Inputs |
| - Channel 1 | Data bits DI 0/DI 1= dynamic code transmission |
| - Channel 2 | Data bits DI 2/DI 3= dynamic code transmission |
| AS-i Outputs |
| - DO 0 | Indicator lamp G24 red |
| - DO 1 | Indicator lamp G24 green |
| - DO 2 | not used |
| - DO 3 | not used |
| AS-i Parameter bits | P0 … P3 not used |
| AS-i Specification | A/B slave |
| - version | V 3.0 |
| - Profile | S-7.A.7.F |
| AS-i Inputs |
| - DI 0 | Command device Position 4 |
| - DI 1 | Command device Position 3 |
| - DI 2 | Command device Position 2 |
| - DI 3 | Command device Position 2 |
| AS-i Outputs |
| - DO 0 | Illuminated signal Position 4 |
| - DO 1 | Illuminated signal Position 3 |
| - DO 2 | Illuminated signal Position 2 |
| - DO 3 | not used |
| AS-i Parameter bits | P0 … P3 not used |
| AS-i input module address | 0 |
| - Default on address 0, programmable via the AS-Interface Master or Hand-held programming device |
| notice | Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector. |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) | No |
| |
| Dimensions |
| |
| Dimensions |
| - Width | 40 mm |
| - Height | 69 mm |
| - Depth | 233.5 mm |
| |
| Pin assignment |
| |
| 1 | AS interface + |
| 2 | None |
| 3 | AS interface − |
| 4 | None |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am
19.06.2019 -
03:57:17h Kasbase 3.3.0.F.64I |
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
Add Product to the basket. 
Print this page 
send URL
Back to top of page
[0]
Safe switching and monitoring
Safety switch with separate actuator
BDF 200 ST1-AS-NHK-LMRD-LTWH-LTBU