Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Solenoid interlock  ->  AZM 161I  ->  AZM 161I-B1  ->  AZM 161SK-12/12RI-024-B1
 Add Product to the basket. 
AZM 161SK-12/12RI-024-B1
• Compact design
• Interlock with protection against incorrect locking.
• Individual coding
• Coding level "High" according to ISO 14119
• Double-insulated
• High holding force
• Long life
• 130 mm x 90 mm x 30 mm
• 1 Cable entry M 20 x 1.5
• Screw connection
• Manual release from side
• Particularly suitable for sliding doors

 
 
Ordering details
 
Product type descriptionAZM 161SK-12/12RI-024-B1 - Ordering suffix
Article number101213351
EAN Code4030661396002
eCl@ss27-27-26-03
 
Approval
 
Approval


 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightAZM 161I
StandardsEN 60947-5-1, BG-GS-ET-19
Compliance with the Directives (Y/N) Yes
Number of actuating directions3
Active principleelectromechanical
- Individual coding
- Coding level "High" according to ISO 14119
Duty cycleMagnet 100
Materials
- Material of the housingsglass-fibre reinforced thermoplastic, Plastic self-extinguishing,
- Material of the actuatorStainless steel
- Material of the contactsSilver
Housing coatingNone
Weight490
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section1 x 0,25
- Max. Cable section1 x 1.5, flexible
Mechanical life> 1.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Positive break force20
positive break travel10
Clamping force2000
Max. Actuating speed2
Minimum actuating radius150
Actuating frequency1000 /
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts2
Number of safety contacts4
Power to unlockYes
Power to lockNo
Rated control voltage24 V/DC
Power consumption10
Rated impulse withstand voltage4
Rated insulation voltage250
Thermal test current6 A
Utilisation categoryAC-15: 230 V / 4 A
DC-13: 24 V / 2,5 A
Max. fuse rating6 A gG D-fuse To DIN EN 60269-1
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Miscellaneous data
 
Applications sliding safety guard,
removable guard,
hinged safety guard
 
Dimensions
 
Dimensions of the sensor
- Width of sensor130
- Height of sensor90
- Length of sensor30
 
notice
 
On hinged guards, minimum actuating radius at 90° to the plane of the actuator 180 mm
minimum actuating radius on hinged guards in line with the plane of the actuator 150 mm
The actuator is not available separately.
The axis of the hinge should be 5 mm above the top edge of the safety switch and in the same plane
Manual release
• For manual release using M5 triangular key, available as accessory
• For maintenance, installation, etc.
 
Included in delivery
 
Included in delivery
• Individually coded actuator
• tamperproof screws
• Slot sealing plugs
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZM 161SK-12/12RI-024-B1-1637
...-1637 0,3 µm gold-plated contacts


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 17.04.2019 - 10:25:43h Kasbase 3.3.0.F.64I