| |
|
Ordering details |
|
Product type description | AZM 161CC-12/03RI-024-B1 - Ordering suffix |
Article number | 101212388 |
EAN Code | 4030661393728 |
eCl@ss | 27-27-26-03 |
|
Approval |
|
Approval | 


 |
|
Classification |
|
Standards | EN ISO 13849-1 |
B10d Normally-closed contact (NC) | 2.000.000 |
Mission time | 20 Years |
notice |  |
|
Global Properties |
|
Permanent light | AZM 161I |
Standards | EN 60947-5-1, BG-GS-ET-19 |
Compliance with the Directives (Y/N)  | Yes |
Number of actuating directions | 3 |
Active principle | electromechanical |
- Individual coding |
- Coding level "High" according to ISO 14119 |
Duty cycle | Magnet 100 |
Materials |
- Material of the housings | glass-fibre reinforced thermoplastic, Plastic self-extinguishing, |
- Material of the actuator | Stainless steel |
- Material of the contacts | Silver |
Housing coating | None |
Weight | 480 |
|
Mechanical data |
|
Design of electrical connection | Cage clamps |
Cable section |
- Min. Cable section | 1 x 0,25 |
- Max. Cable section | 1 x 1.5, flexible |
Mechanical life | > 1.000.000 operations |
notice | All indications about the cable section are including the conductor ferrules. |
Emergency unlocking device (Y/N) | No |
Manual release (Y/N) | Yes |
Emergency release (Y/N) | No |
Latching force | 30 |
Positive break force | 30 |
positive break travel | 10 |
Clamping force | 2000 |
Max. Actuating speed | 2 |
Minimum actuating radius | 150 |
Actuating frequency | 1000 / |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +60 |
Protection class | IP67 to IEC/EN 60529 |
|
Electrical data |
|
Design of control element | Normally open contact (NO), Opener (NC) |
Switching principle | Creep circuit element |
Number of auxiliary contacts | 1 |
Number of safety contacts |
Power to unlock | Yes |
Power to lock | No |
Rated control voltage | 24 V/DC |
Power consumption | 10 |
Rated impulse withstand voltage | 4 |
Rated insulation voltage | 250 |
Thermal test current | 6 A |
Utilisation category | AC-15: 230 V / 4 A DC-13: 24 V / 2,5 A |
Max. fuse rating | 6 A gG D-fuse To DIN EN 60269-1 |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Miscellaneous data |
|
Applications | sliding safety guard,
removable guard,
hinged safety guard |
|
Dimensions |
|
Dimensions of the sensor |
- Width of sensor | 130 |
- Height of sensor | 90 |
- Length of sensor | 30 |
|
notice |
|
On hinged guards, minimum actuating radius at 90° to the plane of the actuator 180 mm |
minimum actuating radius on hinged guards in line with the plane of the actuator 150 mm |
The actuator is not available separately. |
The axis of the hinge should be 5 mm above the top edge of the safety switch and in the same plane |
Manual release |
• For manual release using M5 triangular key, available as accessory |
• For maintenance, installation, etc. |
|
Included in delivery |
|
Included in delivery |
• Individually coded actuator |
• tamperproof screws |
• Slot sealing plugs |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
Ordering suffix |
|
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 161CC-12/03RI-024-B1-1637
|
...-1637 | 0,3 µm gold-plated contacts
|
|
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
21.02.2019 -
16:50:58h Kasbase 3.3.0.F.64I |