| |  Preferred typ |
| |
| Ordering details |
| |
| Product type description | MZM 100 B ST2-SD2PREM-A |
| Article number | 101211153 |
| EAN Code | 4030661389431 |
| eCl@ss | 27-27-26-03 |
| |
| Approval |
| |
| Approval |  EAC
 USA/CAN |
| |
| Classification |
| |
| Standards | EN ISO 13849-1, IEC 61508, IEC 60947-5-3, EN 60947-5-1 |
| PL | e |
| Control category | up 4 |
| PFH | 3.5 x 10-9/h |
| SIL | up 3 |
| Mission time | 20 Years |
| Classification | PDF-M |
| |
| Global Properties |
| |
| Permanent light | MZM 100 |
| Standards | IEC 61508, EN ISO 13849-1, EN ISO 13849-1 |
Compliance with the Directives (Y/N)  | Yes |
| Suitable for safety functions (Y/N) | Yes |
| Protection rating | III |
| Series-wiring | up to 31 components |
| Length of the sensor chain | max. 200 m |
| − without detriment to the category to EN ISO 13849-1 |
| Active principle | inductive |
| Duty cycle ED | 100 % |
| Coding | Universal coding |
| low |
| Duty cycle ED | 100 % |
| Materials |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
| Housing coating | None |
| Weight | 625 |
| Guard locking monitored (Y/N) | No |
| Actuator monitored (Y/N) | Yes |
| Idle assignable pushbutton and LED (Y/N) | No |
| Reaction time | < 150 |
| Duration of risk | < 150 |
| Time to readiness | < 4000 |
| Recommended actuator | MZM 100-B1.1 |
| |
| Mechanical data |
| |
| Design of electrical connection | Connector M12, 8-pole |
| Mechanical life | ≥ 1.000.000 operations |
| notice - Mechanical life | operations for guards ≤ 5 kg;
actuating speed ≤ 0,5 m/s |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration | 10 … 150 HZ, Amplitude 0,35 mm |
| Emergency unlocking device (Y/N) | No |
| Manual release (Y/N) | No |
| Emergency release (Y/N) | No |
| Latching (Y/N) | Yes |
| electrically adjustable latching force | 30 … 100 |
| Permanent magnet (M) typically | 15 N |
| Clamping force F |
| - typically | 750 N |
| - guaranteed | 500 |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +55 |
| Storage and transport temperature |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Relative humidity | 30… 95 |
| - non-condensing |
| - non-icing |
| Protection class | IP67 to IEC/EN 60529 |
| Protection rating | III |
| Air clearances and creepage distances To IEC/EN 60664-1 |
| - Rated impulse withstand voltage Uimp | 0,8 kV |
| - Overvoltage category | III |
| - Degree of pollution | 3 |
| |
| Electrical data |
| |
| Number of auxiliary contacts | 0 |
| Number of safety contacts | 2 |
| Cross circuit/short circuit recognition possible (Y/N) | Yes |
| Power to unlock | No |
| Power to lock | Yes |
| Supply voltage UB (stabilised PELV) |
| - Min. supply voltage | 20.4 V DC |
| - Max. supply voltage | 26.4 V DC |
| Switch frequency | 1 |
| Rated insulation voltage Ui | 32 V DC |
| Operating current Ie | 1 A |
| Utilisation category | DC-13 |
| No-load current I0 | max. 0,5 A |
| Required rated short-circuit current | 100 A |
| Device insulation | ≤ 2 A (if used in accordance with UL 508) |
| notice | Cable length and cable section alter the voltage drop depending on the output current |
| |
| Electrical data - Safety inputs |
| |
| Safety inputs | X1 and X2 |
| Rated operating voltage Ue | −3 V … 5 V (Low)
15 V … 30 V (High) |
| Operating current Ie | > 2 mA / 24 V |
| |
| Electrical data - Safety outputs |
| |
| Safety outputs | Y1 and Y2 |
| Fuse rating | short-circuit proof, p-type |
| Rated operating voltage | 0 V … 4 V under Supply voltage UB |
| Residual current Ir | ≤ 0,5 mA |
| Operating current Ie | 0,25 A |
| Utilisation category | DC-12, DC-13 |
| |
| Electrical data - Diagnostic output |
| |
| Serial diagnostics (Y/N) | Yes |
| Wiring capacitance for serial diagnostics | 50 |
| diagnostic signals | to SD-interface |
| Operating principle of the diagnostic output | The short-circuit proof diagnostic output OUT can be used for central visualisation or control tasks, e.g. in a PLC. |
| notice | The diagnostic output is not a safety-relevant output! |
| |
| Electrical data - Solenoid control IN |
| |
| Control command | Interlocking the solenoid interlock |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) | Yes |
| LED switching conditions display |
| - Supply voltage UB | green LED |
| - switching condition | yellow LED |
| - Error functional defect | red LED |
| |
| ATEX |
| |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| |
| Dimensions |
| |
| Dimensions of the sensor |
| - Width of sensor | 40 |
| - Height of sensor | 179 |
| - Length of sensor | 40 |
| |
| Pin assignment |
| |
| 1 | A1 Supply voltage UB |
| 2 | X1 Safety input 1 |
| 3 | A2 GND |
| 4 | Y1 Safety output 1 |
| 5 | OUT serial diagnostic output |
| 6 | X2 Safety input 2 |
| 7 | Y2 Safety output 2 |
| 8 | IN serial diagnostic input |
| 9 | without function |
| |
| notice |
| |
| As lons as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. The safety outputs then will be enabled again; opening the safety guard therefore is not required. |
| |
| Included in delivery |
| |
| Actuators must be ordered separately. |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am
17.06.2019 -
03:41:03h Kasbase 3.3.0.F.64I |
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
Add Product to the basket. 
Print this page 
send URL
Back to top of page
[0]
Safe switching and monitoring
Safety switch with separate actuator
MZM 100 B ST-1P2PW2REM-A