Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Actuation from side
• with bias magnet

 
Preferred typ
 
Ordering details
 
Product type descriptionBN 120L-10Z
Article number101210877
EAN Code4030661388465
eCl@ss27-27-01-04
 
Global Properties
 
Permanent lightBN 120L
suitable for elevators (Y/N)Yes
Weight55
Recommended actuatorBP 10, 2 x BP 10, BP 15, 2 x BP 15, 2 x BP 15/2, BP 34, BP 20, BP 31, BP 11, BP 12, BP 21
- Lift switchgearBP 10, 2 x BP 10, 2 x BP 15/2, BP 15, 2 x BP 15, BP 34
 
Mechanical data
 
Design of electrical connectionCable
Cable length2
Conductors2 x 0,25
AWG-Number23
Actuating planesActuation from side
Switch distance5 … 50
BP 10 = 5 mm
2 x BP 10 = 17 mm
BP 15 = 6 mm
2 x BP 15 = 17 mm
2 x BP 15/2 = 17 mm
BP 34 = 15 ... 20 mm
BP 20 = 20 mm
BP 31 = 20 mm
BP 11 = 20 mm
BP 12 = 10 ... 30 mm
BP 21 = 25 ... 50 mm
- noticeActuating distance up to 50 mm depending on actuating magnet and version

The specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the
distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual
interference must be observed.
Latching (Y/N)No
bias magnet (Y/N)Yes
Tightening torque for nuts17 90
Actuating speed18
Switching point accuracy± 0,25 mm
 
Ambient conditions
 
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of shutters1
Number of openers0
Switching voltage200
Switching current1 A
Switching capacity30 /
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
Dimensions
 
Dimensions of the sensor
- Length of sensor102
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 21.04.2019 - 10:52:48h Kasbase 3.3.0.F.64I