Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Safety sensors (Archive)  ->  CSS 16  ->  CSS 8-16-2P+D-M-LST
NOTICE: Not available! (Replacement: RSS16)
• Cable with connector M12, 8-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• Comfortable diagnostics through sensor LED and electronic signalling output
• 55 mm x 93 mm x 39.5 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor's hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

Preferred typ
Ordering details
NOTICE: Not available! (Replacement: RSS16)
Product type descriptionCSS 8-16-2P+D-M-LST
Article number101210573
EAN Code4030661388939
Approval BG
StandardsEN ISO 13849-1, IEC 61508, IEC 60947-5-3
PLup e
Control categorybis 4
PFH2.5 x 10−9/h
SILbis 3
Mission time20 Years
Global Properties
Permanent lightCSS 16
StandardsIEC 61508, IEC 60947-5-3, EN ISO 13849-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
FunctionIndividual sensor or end sensor in a series, Sensor for series wiring
Series-wiringup to 16 components
Length of the sensor chainmax. 200 m
Active principleinductive
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the active surfacePlastic, glass-fibre reinforced thermoplastic
Housing construction formBlock
Cable colourGrey (OUT)
Reaction time< 30
Duration of risk≤ 30
Cascadable (Y/N)Yes
Recommended actuatorCST 16-1
Mechanical data
Design of electrical connectionCable with connector
- Connector IN/OUTmale connector M12, 8-pole
Cable length2
mechanical installation conditionsnot flush
Switch distance Sn8 mm
Ensured switch distance ON Sao6 mm
Ensured switch distance OFF Sar11 mm
hysteresismax. 1 mm
Repeat accuracy R R< 0,5 mm
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+55
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Protection classIP65, IP67 to IEC/EN 60529
Protection ratingII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Overvoltage categoryIII
- Degree of pollution3
Electromagnetic compatibility (EMC)
EMC ratingto IEC 61000-6-2
Interfering radiationto IEC 61000-6-4
Electrical data
Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeDC
Switch frequency3
Rated insulation voltage Ui32 VDC
Rated operating voltage Ue (stabilised PELV)
- Min. Rated operating voltage20.4
- Max. Rated operating voltage26.4
Operating current Ie1.1 A
Utilisation categoryDC-12: 24 V / 0,05 A
DC-13: 24 V / 0,05 A
No-load current I00,05 A
Device insulation
noticeCable length and cable section alter the voltage drop depending on the output current
Electrical data - Safety inputs
Safety inputsX1 and X2
Electrical data - Safety outputs
Safety outputsY1 and Y2
Fuse ratingshort-circuit proof
Design of control outputp-type
Number of secure semi-conductor outputs2
Max. output current at secured output0,5 A
Rated operating voltagemin. (Ue − 0,5 V)
Residual current Ir≤ 0,5 mA
Operating current Iemax. 0,5 A
Minimum operating current Im0,5 mA
Utilisation categoryDC-12: 24 V / 0,5 A
DC-13: 24 V / 0,5 A
Voltage drop Ud0,5 V
Electrical data - Diagnostic output
Fuse ratingshort-circuit proof
Design of control outputp-type
Number of semi-conductor outputs with signaling function1
Rated operating voltagemin. (Ue − 4 V)
Operating current Iemax. 0,05 A
Utilisation categoryDC-12: 24 V / 0,05 A
DC-13: 24 V / 0,05 A
LED switching conditions display
LED switching conditions display (Y/N)Yes
Multi-coloured LEDgreen, red, yellow
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor55
- Height of sensor93
- Length of sensor39.5
Pin assignment
1A1 Ue
2X2 Safety input 2
4Y1 Safety output 1
5Signalling output
6X1 Safety input 1
7Y2 Safety output 2
8without function
Requirements for the safety monitoring module2-channel safety input, suitable for p-type sensors with NO function. The safety monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 2 ms. The safety monitoring module does not need to have a cross-wire short monitoring function.
Included in delivery
Actuators must be ordered separately.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 19.09.2019 - 02:30:54h Kasbase 3.3.0.F.64I