Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Accessories for series-wiring with serial diagnostics

Preferred typ
Ordering details
Product type descriptionCSS-Y-8P
Article number101209416
EAN Code4030661388809
Global Properties
Permanent lightY-Adapter
Connector2 x female connector, 8-pole
1 x male connector, 8-pole
Recommended combinationsSolenoid interlock and Sensors
noticeEnables the series-wiring of sensors and solenoid interlocks with SD interface. To that effect, both the safety channels and the serial diagnostic lines are wired in series.

For the wiring, M12 cable extensions can be used. The voltage drop (due to the cable length, cable section, voltage drop per sensor) should be taken into account, as it reduces the maximum number of safety sensors and interlocks with SD interface that can be wired in series.
Mechanical data
Bolting deviceScrew locking
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+75
Electrical data
Rated operating voltage30
Operating current4 A
Fuse rating for the operating voltage4 A
- Width38
- Height20
- Length54.5

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 16.09.2019 - 14:15:56h Kasbase 3.3.0.F.64I