Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Solenoid interlock  ->  EX-AZM 161  ->  EX-AZM 161CC-12/12RK-024-3D
 Add Product to the basket. 
EX-AZM 161CC-12/12RK-024-3D
• Cage clamps
• 6 Contacts
• 130 mm x 114 mm x 30 mm
• Large wiring compartment
• Clamping force 2000N
• Manual release
• Interlock with protection against incorrect locking.
• High holding force
• Long life
• Double-insulated
• Ex-certified screwed cable gland
• Ex certified
• 4 cable entries M 16 x 1.5

Ordering details
Product type descriptionEX-AZM 161CC-12/12RK-024-3D
Article number101195956
EAN Code4030661363295
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
Global Properties
Permanent lightEX-AZM 161
StandardsEN 60079-0, EN 60079-31, EN 60947-5-1, BG-GS-ET-19
Compliance with the Directives (Y/N) Yes
Number of actuating directions3
Active principleelectromechanical
Duty cycle EDMagnet 100 %
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the contactsSilver
Housing coatingNone
Mechanical data
Actuating play in direction of actuation5.5
Design of electrical connectionCage clamps
Cable cross-section of the cable glands
- Min. Cable cross-section of the cable glandsØ 5
- Max. Cable cross-section of the cable glandsØ 10
Cable section
- Min. Cable section1 x 0,75
- Max. Cable section1 x 1.5
Mechanical life> 1.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
Emergency release (Y/N)No
Latching force30
Positive break force20
positive break travel10
Clamping force F2000 N
Impact energy1 J
Max. Actuating speed1
Actuating frequencymax. 1000 / h
Ambient conditions
Ambient temperature
- Min. environmental temperature−10
- Max. environmental temperature+50
Protection classIP67
Electrical data
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts2
Number of safety contacts4
Power to unlockYes
Power to lockNo
Rated control voltage Us24 VAC/DC
Power consumptionmax. 10 W
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe5 A
Utilisation categoryAC-15: 230 V / 4 A, DC-13: 24 V / 2,5 A
Max. fuse rating6 A gG D-fuse
EX-markingEX II 3D Ex tc IIIC T80°C Dc X
Explosion protection categories for gasesNone
Explosion protection Zones for gasesNone
Explosion protected category for dusts3D
Explosion protection Zones for dusts22
Dimensions of the sensor
- Width of sensor130
- Height of sensor114
- Length of sensor30
Manual release
• For maintenance, installation, etc.
• For manual release using M5 triangular key, available as accessory
Included in delivery
Actuators must be ordered separately.
Including Ex-certified screwed cable gland and screw plug
KeywordsEx, EEx, ATEX, Ex AZM161, Ex AZM161, AZM 161 Ex, AZM161ex, AZM161ex, ATEX AZM161

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact
Switch travel diagram

Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 17.02.2020 - 15:40:48h Kasbase 3.3.0.F.64I