| |  Preferred typ |
| |
| Ordering details |
| |
| Product type description | SRB324ST 24V (V.3) |
| Article number | 101195504 |
| EAN Code | 4030661446547 |
| Replaced article number 101179876 |
| eCl@ss | 27-37-19-01 |
| |
| Approval |
| |
| Approval |  BG
 USA/CAN
 EAC |
| |
| Classification |
| |
| Standards | EN ISO 13849-1, IEC 61508, EN 60947-5-1 |
| PL | up e (STOP 0)
bis d (STOP 1) |
| Control category | up 4 (STOP 0)
bis 3 (STOP 1) |
| DC | 99% (STOP 0)
> 60% (STOP 1) |
| CCF | > 65 points |
| PFH value | ≤ 2,0 x 10-8/h (STOP 0)
≤ 2,0 x 10-7/h (STOP 1) |
| SIL | up 3 (STOP 0)
bis 2 (STOP 1) |
| Mission time | 20 Years |
| - notice | The PFH value is applicable for the combinations listed in the table for contact load (K) (current through enabling paths) and switching cycle number (n-op/y).
In case of 365 operating days per year and a 24-hour operation, this results in the specified switching cycle times (t-cycle) for the relay contacts.
Diverging applications on request.
 |
| |
| Global Properties |
| |
| Permanent light | SRB324ST |
| Standards | IEC/EN 60204-1, EN 60947-5-1, EN ISO 13849-1, IEC 61508 |
Compliance with the Directives (Y/N)  | Yes |
| Climatic stress | EN 60068-2-78 |
| Mounting | snaps onto standard DIN rail to EN 60715 |
| Terminal designations | IEC/EN 60947-1 |
| Materials |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic, ventilated |
| - Material of the contacts | AgSn0, Ag-Ni, self-cleaning, positive action |
| Weight | 435 |
| Start conditions | Automatic or Start button ( Optional monitored) |
| Start input (Y/N) | Yes |
| Feedback circuit (Y/N) | Yes |
| Start-up test (Y/N) | No |
| Automatic reset function (Y/N) | Yes |
| Reset with edge detection (Y/N) | Yes |
| Pull-in delay |
| - ON delay with automatic start | typ. 250 ms |
| - ON delay with reset button | typ. 20 ms |
| Drop-out delay |
| - Drop-out delay in case of power failure | typ. 80 ms |
| - Drop-out delay in case of emergency stop | typ. 30 ms / ≤ 36 ms |
| |
| Mechanical data |
| |
| Connection type | Screw connection |
| Cable section |
| - Min. Cable section | 0,25 |
| - Max. Cable section | 2.5 |
| Pre-wired cable | rigid or flexible |
| Tightening torque for the terminals | 0,6 |
| Detachable terminals (Y/N) | Yes |
| Mechanical life | 10.000.000 operations |
| Electrical lifetime | Derating curve available on request |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration To EN 60068-2-6 | 10…55 HZ, Amplitude 0,35 mm |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +60 |
| Storage and transport temperature |
| - Min. Storage and transport temperature | −40 |
| - Max. Storage and transport temperature | +85 |
| Protection class |
| - Protection class-Enclosure | IP40 |
| - Protection class-Terminals | IP20 |
| - Protection class-Clearance | IP54 |
| Air clearances and creepage distances To IEC/EN 60664-1 |
| - Rated impulse withstand voltage Uimp | 4 kV |
| - Overvoltage category | III To VDE 0110 |
| - Degree of pollution | 2 To VDE 0110 |
| |
| Electromagnetic compatibility (EMC) |
| |
| EMC rating | conforming to EMC Directive |
| |
| Electrical data |
| |
| Rated DC voltage for controls |
| - Max. rated DC voltage for controls | 20.4 |
| - Max. rated DC voltage for controls | 28.8 |
| Rated AC voltage for controls, 50 Hz |
| - Min. rated AC voltage for controls, 50 Hz | 20.4 |
| - Max. rated AC voltage for controls, 50 Hz | 26.4 |
| Rated AC voltage for controls, 60 Hz |
| - Min. rated AC voltage for controls, 60 Hz | 20.4 |
| - Max. rated AC voltage for controls, 60 Hz | 26.4 |
| Contact resistance | max. 100 mΩ |
| Power consumption | 3.2 W; 7.1 VA, plus signalling output |
| Type of actuation | AC/DC |
| Rated operating voltage Ue | 24 VDC −15% / +20%, residual ripple max. 10%
24 VAC −15% / +10% |
| Operating current Ie |
| Frequency range | 50 / 60 |
| Electronic protection (Y/N) | Yes |
| Fuse rating for the operating voltage | Internal electronic trip,
tripping current F1: > 2.5 A; F2 > 50 mA
(S11 - S31), > 800 mA (x 4);
Reset after disconnection of supply voltage |
| Current and tension on control circuits |
| - S11, S12, S21, S22, S31, S32 | 24 VDC, Test current: 10 mA |
| - X1, X2 | 24 VDC, Start pulse: 350 mA / 15 ms |
| - X3, X4 | 24 VDC, Start pulse: 130 mA / 80 ms |
| - X4, X5 | 24 VDC, Start pulse: 140 mA / 15 ms |
| Bridging in case of voltage drops | typ. 70 ms |
| |
| Inputs |
| |
| Monitored inputs |
| - Short-circuit recognition (Y/N) | optional |
| - Wire breakage detection (Y/N) | Yes |
| - Earth connection detection (Y/N) | Yes |
| Number of shutters | 0 |
| Number of openers | 2 |
| Cable length | 1-channel without cross-wire detection:
850 m with 1.5 mm²
1400 m with 2.5 mm²
2-channel with/ without cross-wire detection |
| Conduction resistance | max. 40 Ω |
| |
| Outputs |
| |
| - Stop category 1 | Residual current at ambient temperature up to: - 45°C = 12 A; - 55°C = 10 A; - 60°C = 8 A |
| Stop category | 0 / 1 |
| - Stop category 0 | Residual current at ambient temperature up to: - 45°C = 18 A; - 55°C = 15 A; - 60°C = 12 A |
| Number of safety contacts | 5 |
| Number of auxiliary contacts | 1 |
| Number of signalling outputs | 3 |
| Switching capacity |
| - Switching capacity of the safety contacts | (13-14; 23-24; 33-34) max. 250 V, 8 A ohmic (inductive in case of appropriate protective wiring)
(47-48; 57-58) max. 250 V, 6 A ohmic (inductive in case of appropriate protective wiring) |
| - Switching capacity of the auxiliary contacts | 61-62: 24 VDC / 2 A |
| - Switching capacity of the signaling/diagnostic outputs | Y1-Y3: 24 VDC / 100 mA, residual current: 200 mA |
| Fuse rating |
| - Protection of the safety contacts | 8 A slow blow (13-14; 23-24)
6.3 A slow blow (37-38) |
| - Fuse rating for the auxiliary contacts | 2 A slow blow |
| - Fuse rating for the signaling/diagnostic outputs | 500 mA ( Internal electronic trip F3) |
| Utilisation category To EN 60947-5-1 | 13-14, 23-24, 33-34:
AC-15: 230 V / 6 A, DC-13: 24 V / 6 A
37-38, 47-48:
AC-15: 230 V / 3 A, DC-13: 24 V / 2 A |
| Note on the utilisation category |
| Number of undelayed semi-conductor outputs with signaling function | 3 |
| Number of undelayed outputs with signaling function (with contact) | 1 |
| Number of delayed semi-conductor outputs with signaling function. | 0 |
| Number of delayed outputs with signalling function (with contact). | 0 |
| Number of secure undelayed semi-conductor outputs with signaling function | 0 |
| Number of secure, undelayed outputs with signaling function, with contact. | 3 |
| Number of secure, delayed semi-conductor outputs with signaling function | 0 |
| Number of secure, delayed outputs with signaling function (with contact). | 2 |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) | Yes |
| Number of LED´s | 6 |
| LED switching conditions display |
| - The integrated LEDs indicate the following operating states. |
| - Position relay K2 |
| - Position relay K3 |
| - Position relay K1 |
| - Position relay K4 |
| - Supply voltage |
| - Internal operating voltage Ui |
| |
| Miscellaneous data |
| |
| Applications |  Guard system
 Emergency-Stop button
 Pull-wire emergency stop switches
 Safety light curtain
 Safety sensor |
| |
| Dimensions |
| |
| Dimensions |
| - Width | 45 mm |
| - Height | 100 mm |
| - Depth | 121 mm |
| |
| notice |
| |
| Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. |
| |
| notice - Wiring example |
| |
| 2 channel control shown for a guard-door monitor with two contacts, of which at least one contact has positive break, with external reset button (R). |
| Relay outputs: Suitable for 2 channel control, for increase in capacity or number of contacts by means of contactors or relays with positive-guided contacts. |
| (H2) = Feedback circuit |
| The control recognises cross-short, cable break and earth leakages in the monitoring circuit. |
| The wiring diagram is shown with guard doors closed and in de-energised condition. |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am
20.06.2019 -
16:40:58h Kasbase 3.3.0.F.64I |
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
Add Product to the basket. 
Print this page 
send URL
Back to top of page
[0]
Safe signal processing
SRB031MC
SRB324ST 24V (V.3)