Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Connector  ->  Other  ->  BNS-Y-02
• enables the interconnection and the connection of BNS safety sensors to a common safety monitoring module
• for BNS 33, BNS 36, BNS 260 (with 2 NC)

Preferred typ
Ordering details
Product type descriptionBNS-Y-02
Article number101194060
EAN Code4030661358086
Global Properties
Permanent lightY-Adapter
Connector2 x female connector, 4-pole
1 x male connector, 4-pole
Recommended combinationsBNS 33, BNS 36, BNS 260
Mechanical data
Bolting deviceScrew locking
Mechanical lifemin. 100 operations cycles
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67
- Width23.5 mm
- Height31 mm
- Length10 mm
The BNS-Y-02 adapter is suitable for BNS safety sensors with two NC contacts. The BNS-Y-02 enables a series-wiring of these BNS sensors, in which the two NC contacts of each safety sensor are series-wired in a dual-channel manner.
Any conventional 4-pole cable with M8 connector can be used as connecting cable.
The sensor chain is extended by clipping-on further Y-adapters in the direction indicated by the arrow. The extension lead must be terminated by a safety sensor.
Only safety sensors with the same contact configuration can be wired in series. The BNS-Y-11 and BNS-Y-02 types must not be mixed.
The maximum length of the series-wired chain is 50 m.

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.08.2019 - 06:53:44h Kasbase 3.3.0.F.64I