Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• With pre-wired cable
• Actuation from side
• with bias magnet

 
Preferred typ
 
Ordering details
 
Product type descriptionBN 650-10Z
Article number101187273
EAN Code4030661335728
eCl@ss27-27-01-04
 
Global Properties
 
Permanent lightBN 650
suitable for elevators (Y/N)Yes
Weight65
Recommended actuatorBP 10, 2 x BP 10, BP 15, 2 x BP 15, 2 x BP 15/2, BP 34, BP 20, BP 31, BP 11, BP 12, BP 21
- Lift switchgearBP 10, 2 x BP 10, 2 x BP 15/2, BP 15, 2 x BP 15, BP 34
 
Mechanical data
 
Design of electrical connectionCable
Cable length1
Conductors2 x 0,25
AWG-Number23
Switching frequency300/
Actuating planesActuation from side
Switch distance5 … 50
BP 10 = 5 mm
2 x BP 10 = 17 mm
BP 15 = 6 mm
2 x BP 15 = 17mm
2 x BP 15/2 = 17 mm
BP 34 = 15 ... 20 mm
BP 20 = 20 mm
BP 31 = 20 mm
BP 11 = 20 mm
BP 12 = 10 … 30 mm
BP 21 = 25 ... 50 mm
- noticeActuating distance up to 50 mm depending on actuating magnet and version

The specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the
distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual
interference must be observed.
Bounce duration0,15
Latching (Y/N)No
bias magnet (Y/N)Yes
Actuating speed18
Switching point accuracy± 0,25 mm
 
Ambient conditions
 
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of shutters1
Number of openers0
Switching time - Close0,35
Switching time - Open-
Switch frequency< 300
Switching voltage200
Switching current1 A
Switching capacity30 /
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 19.02.2019 - 00:06:47h Kasbase 3.3.0.F.64I