Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Magnetic reed switch  ->  EX-BN 20  ->  EX-BN 20-2RZ-3G/D
• 2 reed contacts
• Aluminium enlosure
• Long life
• 104 mm x 52 mm x 47 mm
• Non-contact principle
• 1 Reed contakts
• Actuating distance up to 50 mm depending on actuating magnet and version
• Screw connection
• Ex certified

 
 
Ordering details
 
Product type descriptionEX-BN 20-2RZ-3G/D
Article number101187222
EAN Code4030661335117
eCl@ss27-27-01-04
 
Approval
 
Approval EEX
 
Global Properties
 
Permanent lightEX-BN 20
StandardsEN 60079-0, EN 60079-15, EN 60079-31
Compliance with the Directives (Y/N) Yes
Active principleMagnetic drive
Materials
- Material of the housingslight alloy die-casting, painted
- Material of the active surfaceMetal film
Housing construction formrectangular
Weight335
Recommended actuatorBP 10 N, BP 10 S, 2 x BP 10 N, 2 x BP 10 S, BP 15 N, 2 x BP 15/2, BP 15/2 N, BP 34 N, BP 34 S, BP 20, BP 20 N, BP 20 S, BP 31 N, BP 31 S, BP 11 N, BP 11 S, 2 x BP 11 N, 2 x BP 12 S, BP 21 N, BP 21 S, 2 x BP 21 N, 2 x BP 21 S, BE 20 N(S) ST 24VDC, BE 20 N(S) 48VDC
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable cross-section of the cable glands
- Min. Cable cross-section of the cable glandsØ 6
- Max. Cable cross-section of the cable glandsØ 10
Mechanical life1.000.000.000 operations
Electrical lifetime1.000.000 … 1.000.000.000 operations
Actuating planesActuation from side
Active arealateral
Switch distance Sn12 mm … 50 mm
- noticeActuating distance up to 50 mm depending on actuating magnet and version
Type of actuationMagnet
restistance to shock30 g / 11 ms
resistant to vibration50 g, on sine wave oscillation
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Bounce duration0,3 … 0,6
Latching (Y/N)No
Impact energymax. 4 J
bias magnet (Y/N)Yes
Actuating speedmax. 18 m/s
Switching point accuracy± 0,25 mm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−15
- Max. environmental temperature+70
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+70
Protection classIP67
 
Electrical data
 
Design of control elementbistable contact
Number of snap-in contacts2
Switching time - Close0,3 - 1.5
Switching time - Openmax. 0,5 ms
Voltage typeAC, alternating current
Switch frequency
Dielectric strength> 600 VAC (50 HZ)
Switching voltagemax. 250 VAC/DC
Switching currentmax. 3 A
Switching capacitymax. 120 VA / W
Interference resistance to magnetic fields
 
Outputs
 
Design of control outputReed contakts
 
LED switching conditions display
 
LED switching conditions display (Y/N)No
 
ATEX
 
EX-markingEX II 3G Ex nC IIC T5 Gc X
EX II 3D Ex tc IIIC T90°C Dc X
Explosion protection categories for gasesATEX gas ex-protection, Cat. 3
Explosion protection Zones for gases2
Explosion protected category for dustsATEX dust ex-protection, Cat. 3
Explosion protection Zones for dusts22
 
Dimensions
 
Dimensions of the sensor
- Width of sensor104
- Height of sensor52
- Length of sensor47
 
notice
 
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).
 
Included in delivery
 
Actuators must be ordered separately.
Ex-certified screwed cable gland
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.02.2019 - 09:37:20h Kasbase 3.3.0.F.64I