Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Safety sensor
• Thermoplastic enclosure
• no mechanical wear
• 36 mm x 26 mm x 13 mm
• Integrated AS-Interface
• Concealed mounting possible
• Long life
• Insensitive to transverse misalignment
• Insensitive to soiling
• AS-Interface LED and status display
• 2 m Pre-wired cable, 2-pole

Ordering details
Product type descriptionBNS 260 AS-R
Article number101186153
EAN Code4030661333625
Approval AS-i
StandardsEN ISO 13849-1, IEC 61508
PLup e
Control categorybis 4
PFH6.21 x 10-9 / h
- noticeup to max. 500.000 switching cycles/year
SILup 3
Mission time20 Years
Global Properties
Permanent lightBNS 260 AS
StandardsEN 50295, IEC 60947-5-3, EN ISO 13849-1, IEC 61508
Compliance with the Directives (Y/N) Yes
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the cable mantleLSYY
Coding available (Y/N)Yes
Response time< 100
Recommended actuatorBPS 260-1, BPS 260-2
Mechanical data
Design of electrical connectionPre-wired cable, 2-pole
Cable length2
Conductors2 x 0,23
mechanical installation conditionsquasi-flush
Ensured switch distance ON Sao5 mm
Ensured switch distance OFF Sar15 mm
Repeat accuracy R RR ≤ 0,1 x Sao
noticeAxial misalignment
The safety sensor and the actuator tolerate a horizontal and vertical misalignment to each other. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor is active in the tolerance range.
Type of actuationMagnet
Direction of motionhead-on with regard to the active surface
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Door hingeright
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+70
Protection classIP67 to IEC/EN 60529
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Rated insulation voltage Ui32 VDC
- Overvoltage categoryIII
- Degree of pollution3
Electrical data - AS interface
AS-i Supply voltage26.5 … 31.6 VDC, Protection against polarity reversal
AS-i operating current≤ 50
AS-i Device insulationinternally short-circuit proof
AS-i Specification
- versionV 2.1
- ProfileS-0.B.F.E
- IO-Code0x0
- ID-Code0xB
- ID-Code10xF
- ID-Code20xE
AS-i Inputs
- Channel 1Data bits DI 0/DI 1= dynamic code transmission
- Channel 2Data bits DI 2/DI 3= dynamic code transmission
AS-i OutputsDO 0 … DO 3 not used
AS-i Parameter bitsP0 … P3 not used
AS-i input module address0
- Default on address 0, programmable via the AS-Interface Master or Hand-held programming device
LED switching conditions display
LED switching conditions display (Y/N)Yes
AS-i LED switching conditions display
(1) green/red LED (AS-i duo LED)Supply voltage / Communication error / slave address = 0
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor36
- Height of sensor26
- Length of sensor13
Pin assignment
1Brown (AS interface +)
3Blue (AS interface −)
Included in delivery
Actuators must be ordered separately.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 16.09.2019 - 02:29:53h Kasbase 3.3.0.F.64I