| | |
| |
| Ordering details |
| |
| NOTICE: Not available! (Replacement: SLC 425I) |
| Product type description | SLC 415I-E/R1210-40-12-H |
| Article number | 101186037 |
| EAN Code | 4030661343358 |
| eCl@ss | 27-27-27-04 |
| |
| Approval |
| |
| Approval |  TÜV
 USA/CAN |
| |
| Global Properties |
| |
| Permanent light | SLC 415I Sicherheits-Lichtvorhang |
| Standards | IEC/EN 61496-1/-2 |
Compliance with the Directives (Y/N)  | Yes |
| Operating resource protection class | Protection class 3 |
| Safety type in accordance with IEC 61496-1 | 4 |
| Materials |
| - Material of the housings | Aluminium |
| Beam coding (Y/N) | Yes |
| Protection field height | 1210 |
| Range of the protection field | 0 - 60000 |
| Reaction time | 21 |
| Wave length of the sensors | 950 nm |
| Fade-out is possible (Y/N) | No |
| Override possible (Y/N) | Yes |
| reduced resolution (Y/N) | No |
| Clock control possible (Y/N) | No |
| Muting possible (Y/N) | Yes |
| Restart block (Y/N) | Yes |
| Master/slave function | No |
| Cascadable (Y/N) | No |
| Monitoring function of downstream devices (Y/N) | Yes |
| Recommended safety-monitoring module | SCR 402R-301
AZR 311 TL
AST LC ST-AS |
| |
| Mechanical data |
| |
| Detection ability for test bodies | 40 |
| Number of beams | 40 |
| Design of electrical connection | Connector |
| - Wiring of the transmitter | connector plug M12, 5-pole |
| - Wiring of the receiver | connector plug M23, 19-pole |
| - Wiring of the muting sensors | connector socket 2x M12, 5-pole |
| Cable length | max. 100 m |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature | 0 °C |
| - Max. environmental temperature | +55 °C |
| Storage and transport temperature |
| - Min. Storage and transport temperature | −20 °C |
| - Max. Storage and transport temperature | +70 °C |
| Protection class | IP65 to IEC/EN 60529 |
| |
| Electrical data |
| |
| Design of output switching element OSSD | PNP |
| Power consumption |
| - Power consumption Transmitter | 3 |
| - Power consumption Receiver | 6 |
| Voltage type | DC |
| Switching voltage of the OSSD in high state | 24 V ± 20% |
| |
| Outputs |
| |
| Max. output current at secured output | 500 mA |
| |
| Electrical data - Safety outputs |
| |
| Number of secure semi-conductor outputs | 2 piece |
| Number of secure outputs with contact | 0 piece |
| |
| Electrical data - Diagnostic output |
| |
| Number of semi-conductor outputs with signaling function |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) | Yes |
| - Status and diagnostics |
| - 7-segment display |
| |
| ATEX |
| |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| |
| Dimensions |
| |
| Dimensions of the sensor |
| - Width of sensor | 60 mm |
| - Height of sensor | 1336 |
| - Length of sensor | 50 mm |
| |
| notice |
| |
| In case of failure (interruption of the 0 V supply) the maximum leakage current is 0,3 mA. |
| 2 or 4 muting sensors can be connected. |
| The muting sensors (e.g. LF 50) must be ordered separately. |
| |
| Included in delivery |
| |
| Delivery scope of disposable system | Transmitter + receiver, Mounting angle, T-slot nuts |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am
19.04.2019 -
04:46:28h Kasbase 3.3.0.F.64I |
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
Add Product to the basket. 
Print this page 
send URL
Back to top of page
[0]
Archive
Safety light grids (Archive)
SLC 415I-E/R0310-30-12