Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
Home ->
Two-hand control panels  ->  SEPG 05.3  ->  SEPG
• light alloy die-casting
• 2 part enclosure
• Stand and wall mounting possible
• Ergonomic operation
• The terminal blocks and relay can be mounted in the inner part
• Operating panel suitable for at least 8 additional command devices and indicator lights
• Holes drilled under the cover and central hole Ø = 22,3mm
• Emergency Stop button in metal version Ø 49 mm
• 2 black operating buttons (positioning parts) Ø 55 mm in Metal filmdesign

Ordering details
Product type descriptionSEPG
Article number101172760
EAN Code4250116202850
Global Properties
Permanent lightSEPG 05.3
StandardsIEC/EN 60947-5-5, EN ISO 13850, EN 574
Compliance with the Directives (Y/N) Yes
Number of operating push buttons (positioning parts)2
- consisting ofEDP55SW; EF10.1; EF03.1
Number of Emergency Stop button1
- consisting ofEDRR50RT; EFR; EF303.1
- Material of the housingsAluminium
Housing coatingpowder-coated
Suitable for EMERGENCY-OFF (Y/N)Yes
Foot (Y/N)No
Pre-wiring on terminal block (Y/N)No
Stepped switching (Y/N)No
Switching block (Y/N)No
Construction kit possible (Y/N)Yes
Recommended combinationsSRB201ZH, SRB200ZHX1, SRB201ZHX3
Mechanical data
Connection typeScrew connection
Cable section
- Min. Cable section
- Max. Cable section1.5
Mechanical life10.000.000 operations
Ambient conditions
Protection classIP65
Electrical data
Number of shutters2
Number of openers2
Rated insulation voltage440
Thermal test current10 A
Utilisation categoryAC-15: 250 V / 8 A
DC-13: 24 V / 5 A
- Width494 mm
- Height184 mm
- Depth160 mm
diameters for the actuating heads
- Emergency stop latching pushbutton49
- Operating push buttons (positioning parts)55
Customer-specific executions (completely pre-wired, special paint, etc.)
4 premachined predetermined breaking points (M25 x 1,5) for the cable gland outputs
1 NO/1 NC contact per unit, 1 NO/1 NC contact for Emergency-Stop
Central part suitable for fitting of up to 10 additional command devices and indicator lights (Ø 22 mm)
Optional: actuators with low actuating force
Two-hand control panels

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.02.2020 - 22:41:29h Kasbase 3.3.0.F.64I