Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Safety sensors  ->  CSS 180  ->  CSS 8-180-2P+D-M-LST
 Add Product to the basket. 
CSS 8-180-2P+D-M-LST
• Cable with connector M12, 8-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor's hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs

 
Preferred typ
 
Ordering details
 
Product type descriptionCSS 8-180-2P+D-M-LST
Article number101169560
EAN Code4030661296005
eCl@ss27-27-24-01
 
Approval
 
Approval BG
USA/CAN
EAC
 
Classification
 
StandardsEN ISO 13849-1, IEC 61508, IEC 60947-5-3
PLup e
Control categorybis 4
PFH2.5 x 10- 9 / h
SILbis 3
Mission time20 Years
ClassificationPDF-M
 
Global Properties
 
Permanent lightCSS 180
StandardsIEC 61508, IEC 60947-5-3
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N)Yes
FunctionIndividual sensor or end sensor in a series, Sensor for series wiring
Series-wiringup to 16 components
Length of the sensor chainmax. 200 m
Active principleinductive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
- Material of the nutsPlastic, glass-fibre reinforced thermoplastic
- Material of the active surfacePlastic, glass-fibre reinforced thermoplastic
Housing construction formcylinder, thread
Cable colourGrey ( OUT)
Weight138
Reaction time≤ 30
Duration of risk≤ 30
Cascadable (Y/N)No
Recommended actuatorCST 180-1, CST 180-2
 
Mechanical data
 
Design of electrical connectionCable with connector
- Connector IN/OUTConnector M12, 8-pole
Cable length2
mechanical installation conditionsnot flush
Switch distance Sn8 mm
Ensured switch distance ON Sao7 mm
Ensured switch distance OFF Sar10 mm
hysteresis≤ 0,7 mm
Repeat accuracy R R≤ 0,2 mm
restistance to shock30 g / 11 ms
Resistance to vibration10 … 55 HZ, Amplitude 1 mm
Tightening torque for nutsA/F 24 max. 300 Ncm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+60
Storage and transport temperature
- Min. Storage and transport temperature−25
- Max. Storage and transport temperature+85
Protection classIP65, IP67 to IEC/EN 60529
Protection ratingII
Air clearances and creepage distances To IEC/EN 60664-1
- Rated impulse withstand voltage Uimp0,8 kV
- Overvoltage categoryIII
- Degree of pollution3
 
Electrical data
 
Cross circuit/short circuit recognition possible (Y/N)Yes
Voltage typeDC
Supply voltage UB
- Min. supply voltage20.4 V DC
- Max. supply voltage26.4 V DC
Switch frequency3
Rated insulation voltage Ui32 V DC
Residual current Ir≤ 0,5 mA
Operating current Ie1 A
Utilisation categoryDC-12: 24 V / 0,5 A
DC-13: 24 V / 0,5 A
No-load current I00,05 A
 
Electrical data - Safety outputs
 
Safety outputsY1 and Y2
Fuse ratingshort-circuit proof, p-type
Design of control outputPNP
Number of secure semi-conductor outputs2
Max. output current at secured output0,5 A
Rated operating voltage24 VDC
Operating current Ie0,5 A
Utilisation categoryDC-12: 24 V / 0,5 A
DC-13: 24 V / 0,5 A
Voltage drop Udmax. 0,5 V
 
Electrical data - Diagnostic output
 
Fuse ratingshort-circuit proof, p-type
Design of control outputPNP
Number of semi-conductor outputs with signaling function1
Rated operating voltage24 VDC
Operating current Ie0,05 A
Utilisation categoryDC-12, DC-13
Wiring capacitance for serial diagnosticsmax. 50 nF
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
Multi-coloured LEDgreen, red, yellow
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor92
- Diameter of sensorM18
 
Pin assignment
 
1A1 Ue
2X2 Safety input 2
3A2 GND
4Y1 Safety output 1
5Signalling output
6X1 Safety input 1
72 Safety output Y2
8without function
 
notice
 
Requirements for the safety monitoring module2-channel safety input, suitable for p-type sensors with NO function. The safety monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 2 ms. The safety monitoring module does not need to have a cross-wire short monitoring function.
 
Included in delivery
 
Actuators must be ordered separately.
Mounting accessories2 x Nuts M 18 x 1

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.06.2019 - 03:03:55h Kasbase 3.3.0.F.64I