| |
|
Ordering details |
|
Product type description | AZM 415-33ZPDKE 110 VAC - Ordering suffix |
Article number | 101164608 |
EAN Code | 4030661206493 |
eCl@ss | 27-27-26-03 |
|
Approval |
|
Approval | CCC |
|
Classification |
|
Standards | EN ISO 13849-1 |
B10d Normally-closed contact (NC) | 2.000.000 |
Mission time | 20 Years |
notice |  |
|
Global Properties |
|
Permanent light | AZM 415 |
Standards | EN 60947-5-1, BG-GS-ET-19 |
Compliance with the Directives (Y/N)  | Yes |
Number of guard doors | 2 |
Number of actuating directions | 1 |
Active principle | electromechanical |
Duty cycle ED | Magnet 100 % |
Materials |
- Material of the housings | Aluminium |
- Material of the contacts | Silver |
Housing coating | painted |
Weight | 1260 |
|
Mechanical data |
|
Design of electrical connection | Screw connection |
Cable section |
- Min. Cable section | 2 x 0,75 mm² |
- Max. Cable section | 2 x 2.5 mm² |
Mechanical life | > 1.000.000 operations |
notice | All indications about the cable section are including the conductor ferrules. |
Emergency unlocking device (Y/N) | No |
Manual release (Y/N) | Yes |
- using triangular key |
Emergency release (Y/N) | No |
Latching force | 150 N … 400 N |
Positive break force | 15 N min. |
positive break travel | 4.5 |
Clamping force F | 2500 N ( for each guard) |
Max. Actuating speed | 0,2 m/s |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +50 °C |
Protection class | IP67 to IEC/EN 60529 |
|
Electrical data |
|
Design of control element | Normally open contact (NO), Opener (NC) |
Switching principle | Creep circuit element |
Number of auxiliary contacts | 3 |
Number of safety contacts | 3 |
Power to unlock | Yes |
Power to lock | No |
Rated control voltage Us | 110 V AC |
Power consumption | max. 10 W |
Rated impulse withstand voltage Uimp | 4 kV |
Rated insulation voltage Ui | 250 V |
Thermal test current Ithe | 6 A |
Utilisation category | AC-15: 230 V / 4 A, DC-13: 24 V / 1 A |
Max. fuse rating | 6 A gG D-fuse |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Miscellaneous data |
|
Applications | sliding safety guard
hinged safety guard |
|
Dimensions |
|
Dimensions of the sensor |
- Width of sensor | 141 |
- Height of sensor | 136 |
- Length of sensor | 46.5 |
|
notice |
|
Manual release |
• Manual release by means of M5 triangular key |
• M5 triangular key, available as accessory |
• For maintenance, installation, etc. |
• Only used on units with power to unlock principle |
|
notice - Dimensional drawing |
|
A | setting screw Ball latch |
E | Manual release by means of M5 triangular key |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
Ordering suffix |
|
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 415-33ZPDKE 110 VAC-1637
|
...-1637 | 0,3 µm gold-plated contacts
|
|
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
22.02.2019 -
20:17:08h Kasbase 3.3.0.F.64I |