| |
|
Ordering details |
|
NOTICE: Not available! |
Product type description | AZ 355-03ZRK - Ordering suffix |
Article number | 101159138 |
EAN Code | 4030661184531 |
eCl@ss | 27-27-26-02 |
|
Approval |
|
Approval | 

 |
|
Classification |
|
Standards | EN ISO 13849-1 |
B10d Normally-closed contact (NC) | 2.000.000 |
Mission time | 20 Years |
notice |  |
|
Global Properties |
|
Permanent light | AZ 355 |
Standards | EN 60947-5-1, BG-GS-ET-15 |
Materials |
- Material of the housings | Aluminium |
- Material of the contacts | Silver |
Housing coating | painted |
|
Mechanical data |
|
Design of electrical connection | Screw connection |
Cable section |
- Min. Cable section | 0,75 |
- Max. Cable section | 2.5 |
Mechanical life | 10.000.000 operations |
notice | All indications about the cable section are including the conductor ferrules. |
higher Latching force (Y/N) | Yes |
Latching force | 30 |
Positive break force | 5 N for each NC contact fitted |
positive break travel | 10.7 mm |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +65 °C |
Protection class | IP67 to IEC/EN 60529 |
|
Electrical data |
|
Design of control element | Opener (NC) |
Switching principle | Creep circuit element |
Number of auxiliary contacts | 0 |
Number of safety contacts | 3 |
Rated impulse withstand voltage | 4 |
Rated insulation voltage | 250 |
Thermal test current Ithe | 10 A |
Utilisation category | AC-15: 230 V / 4 A, DC-13: 24 V / 4 A |
Max. fuse rating | 6 A gG D-fuse |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Dimensions |
|
Dimensions of the sensor |
- Width of sensor | 66.7 mm |
- Height of sensor | 114 mm |
- Length of sensor | 38 mm |
|
notice |
|
By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is needed for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. |
|
Included in delivery |
|
Actuators must be ordered separately. |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
Switch travel diagram |
|

Notes Switch travel diagram
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
|
|
Ordering suffix |
|
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZ 355-03ZRK-1637
|
...-1637 | 0,3 µm gold-plated contacts
|
|
...-ST  | M12 connector with A-coding Rated impulse withstand voltage Uimp: 0,8 kV Rated insulation voltage Ui: 50 V Rated operating current/voltage Ie/Ue: 50 V / 4 A Caution! The versions with connector may only be used in PELV circuits to EN 60204-1.
|
|
...-NPT | Cable entry NPT 1/2“
|
|
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
16.02.2019 -
16:23:07h Kasbase 3.3.0.F.64I |