| |
|
Ordering details |
|
Product type description | BNS 303-12ZG 5,0M - Ordering suffix |
Article number | 101154625 |
EAN Code | 4030661173542 |
eCl@ss | 27-27-24-02 |
|
Approval |
|
Approval | BG
USA/CAN
EAC |
|
Classification |
|
Standards | EN ISO 13849-1 |
B10d Normally-closed contact/Normally open contact (NC/NO) | 25.000.000 |
- notice | at max. 20% contact load |
Mission time | 20 Years |
notice |  |
|
Global Properties |
|
Permanent light | BNS 303 |
Standards | IEC 60947-5-3, BG-GS-ET-14 |
Compliance with the Directives (Y/N)  | Yes |
Materials |
- Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
- Material of the nuts | thermoplastic |
- Material of the cable mantle | PVC |
Weight | 208 |
Coding available (Y/N) | Yes |
Monitoring function of downstream devices (Y/N) | No |
Prerequisite evaluation unit |
Recommended safety-monitoring module | AES 1102, AES 1112, AES 6112, AES 7112 |
Recommended actuator | BPS 300 , BPS 303 , BPS 303 SS |
|
Mechanical data |
|
Design of electrical connection | Cable |
Cable length | 5 |
Conductors | 4 x 0,25 |
AWG-Number | 23 |
mechanical installation conditions | quasi-flush |
Active area |
Ensured switch distance ON Sao | 5 mm |
Ensured switch distance OFF Sar | 15 mm |
Type of actuation | Magnet |
Direction of motion | head-on with regard to the active surface |
restistance to shock | 30 g / 11 ms |
Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
Tightening torque for nuts | A/F 36 max. 300 Ncm |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −25 °C |
- Max. environmental temperature | +70 °C |
Storage and transport temperature |
- Min. Storage and transport temperature | −25 °C |
- Max. Storage and transport temperature | +70 °C |
Protection class | IP67 |
|
Electrical data |
|
Integrated Safety monitoring module available (Y/N) | No |
Cross circuit/short circuit recognition possible (Y/N) | Yes |
Voltage type | VAC/DC |
Switch frequency | max. 5 HZ |
Switching voltage | max. 24 VDC |
Switching current | max. 10 mA |
Switching capacity | max. 240 mW |
|
Outputs |
|
Design of control output | Other, Reed contakts |
Number of shutters | 1 |
Number of openers | 2 |
Design of output signal switching device |
|
Electrical data - Safety outputs |
|
Number of secure semi-conductor outputs | 0 |
Number of secure outputs with contact | 2 |
|
Electrical data - Diagnostic output |
|
Number of semi-conductor outputs with signaling function | 0 |
Number of outputs with signaling function that already have a contact | 1 |
|
LED switching conditions display |
|
LED switching conditions display (Y/N) | Yes |
- The LED is illuminated when the guard door is open. |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Dimensions |
|
Dimensions of the sensor |
- Length of sensor | 44 mm |
- Diameter of sensor | M30 |
|
notice |
|
Contact symbols shown for the closed condition of the guard device. |
The contact configuration for versions with or without LED is identical. |
|
Included in delivery |
|
Actuators must be ordered separately. |
Mounting accessories - Nuts M 30 x 1,5 | 2 piece |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
Ordering suffix |
|
The applicable ordering suffix is added at the end of the part number of the safety switch. Order example: BNS 303-12ZG 5,0M-2211
|
...-2211 | higher switching distance Sar: 8 mm Sao: 18 mm
|
|
...-2187  | Individual contact outlet LED version
|
|
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
20.02.2019 -
16:34:05h Kasbase 3.3.0.F.64I |