| |  Preferred typ |
| |
| Ordering details |
| |
| Product type description | BNS 33-12Z-2363 2,0M |
| Article number | 101153903 |
| EAN Code | 4030661170398 |
| eCl@ss | 27-27-24-02 |
| |
| Approval |
| |
| Approval |  BG
 USA/CAN
 EAC |
| |
| Classification |
| |
| Standards | EN ISO 13849-1 |
| B10d Normally-closed contact/Normally open contact (NC/NO) | 25.000.000 |
| Mission time | 20 Years |
| notice |  |
| |
| Global Properties |
| |
| Permanent light | BNS 33 |
| Standards | IEC 60947-5-3, BG-GS-ET-14 |
Compliance with the Directives (Y/N)  | Yes |
| Materials |
| - Material of the housings | Plastic, glass-fibre reinforced thermoplastic |
| - Material of the cable mantle | PVC |
| Weight | 120 |
| Monitoring function of downstream devices (Y/N) | No |
| Prerequisite evaluation unit | Yes |
| Recommended safety-monitoring module | AES 3075, SRB219IT, SRB308IT |
| Recommended actuator | BPS 33, BPS 33-2326 |
| |
| Mechanical data |
| |
| Design of electrical connection | Cable with Connector 7/8" |
| Cable length | 2 |
| AWG-Number | 23 |
| mechanical installation conditions | not flush |
| Active area | Side |
| Ensured switch distance ON Sao | 5 mm / 8 mm |
| - BPS 33 = 5 mm Actuating magnet |
| - BPS 33-2326 = 8 mm Actuating magnet |
| Ensured switch distance OFF Sar | 15 mm / 18 mm |
| - BPS 33-2326 = 18 mm Actuating magnet |
| - BPS 33 = 15 mm Actuating magnet |
| Repeat accuracy R R | ≤ 0,1 x Sao |
| Type of actuation | Magnet |
| Direction of motion | head-on with regard to the active surface |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature | −25 °C |
| - Max. environmental temperature | +70 °C |
| Storage and transport temperature |
| - Min. Storage and transport temperature | −25 °C |
| - Max. Storage and transport temperature | +70 °C |
| Protection class | IP67 |
| |
| Electrical data |
| |
| Integrated Safety monitoring module available (Y/N) | No |
| Cross circuit/short circuit recognition possible (Y/N) | No |
| Voltage type | VAC/DC |
| Switch frequency | max. 5 HZ |
| Switching voltage | max. 120 V |
| Switching current | max. 250 mA |
| Switching capacity | max. 10 W |
| |
| Outputs |
| |
| Design of control output | Other, Reed contakts |
| Number of shutters | 1 |
| Number of openers | 2 |
| |
| Electrical data - Safety outputs |
| |
| Number of secure semi-conductor outputs | 0 |
| Number of secure outputs with contact | 0 |
| |
| Electrical data - Diagnostic output |
| |
| Number of semi-conductor outputs with signaling function | 0 |
| Number of outputs with signaling function that already have a contact | 0 |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) | No |
| |
| ATEX |
| |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| |
| Dimensions |
| |
| Dimensions of the sensor |
| - Width of sensor | 88 mm |
| - Height of sensor | 25 mm |
| - Length of sensor | 13 mm |
| |
| notice |
| |
| Contact symbols shown for the closed condition of the guard device. |
| The contact configuration for versions with or without LED is identical. |
| |
| Included in delivery |
| |
| Actuators must be ordered separately. |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am
18.08.2019 -
01:34:56h Kasbase 3.3.0.F.64I |
Contact closed
Contact open
Setting range
Break point
Positive opening sequence/- angle
Add Product to the basket. 
Print this page 
send URL
Back to top of page
[0]
Safe switching and monitoring
Safety switch with separate actuator
BNS 33-02Z-2187