Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Design M30
• Metal enclosure
• AC 2-wire
• Wiring compartment can be turned 180°

Preferred typ
Ordering details
Product type descriptionIFO 8-30-10/01
Article number101149285
EAN Code4030661150833
Global Properties
Permanent lightIFO - M30
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
- Material of the housingsBrass
- Material of the nutsBrass
- Material of the active surfacePlastic
Housing coatingnickel-plated
Housing construction formcylinder, thread
Push button functionbright/dark switching
Detection range Sdmax. 800 mm
Time function (Y/N)No
Preliminary failure signal possible (Y/N)No
Mechanical data
• Wiring compartment
Design of electrical connectionScrew connection
Cable entryM16 x 1.5
Cable section
- Min. Cable section
- Max. Cable section2 x 1.5
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 36 max. 3000 Ncm
Ambient conditions
Ambient temperature
- Min. environmental temperature0
- Max. environmental temperature+70
Protection classIP65 to IEC/EN 60529
Electrical data
Design of control elementNormally open contact (NO) or Opener (NC)
Number of wire2
Voltage typeAC, alternating current
Supply voltage UB
- Min. supply voltage15
- Max. supply voltage250
Rated supply frequency45 … 65
Switch frequencyapprox. 10 HZ
Voltage drop Udapprox. 7 V (250 V / 500 mA)
Rated impulse withstand voltage Uimpmax. 10 kV
Residual current Ir3 mA
Minimum operating current Im10 mA
Operating current Ie500 mA
noticeProgrammable NO contact (Load switched with reflection / light-operated) or NC contact (Load not switched with reflection / dark-operated)
Programmable by repositioning the plug-in jumper at the terminal screws.
Design of control outputTwo-wire
LED switching conditions display
LED switching conditions display (Y/N)Yes
- yellow LED
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor46
- Height of sensor46
- Length of sensor118
- Diameter of sensorM30
Instead of nuts, a mounting clamp can be provided.

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.09.2019 - 18:11:08h Kasbase 3.3.0.F.64I