Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Design M30
• Thermoplastic enclosure
• DC 3-wire
• Wiring compartment can be turned 180°

 
Preferred typ
 
Ordering details
 
Product type descriptionIFO 10-300-10/01P
Article number101148720
EAN Code4030661148076
eCl@ss27-27-09-02
 
Global Properties
 
Permanent lightIFO - M30
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
Materials
- Material of the housingsPlastic
- Material of the nutsPlastic
- Material of the washerperbunan®
- Material of the active surfacePlastic
Housing coating
Housing construction formcylinder, thread
Weight70
Push button functionbright/dark switching
Detection range Sdmax. 1000 mm
Range1
Time function (Y/N)No
Preliminary failure signal possible (Y/N)No
 
Mechanical data
 
• Wiring compartment
Design of electrical connectionScrew connection
Cable entryM16 x 1.5
Cable section
- Min. Cable section
- Max. Cable section3 x 1.5
AWG-Number15
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 36 max. 400 Ncm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature0
- Max. environmental temperature+70
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO) or Opener (NC)
Number of wire3
Voltage typeDC
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage60
Rated supply frequency
Switch frequencyapprox. 100 HZ
Voltage drop Udapprox. 2 V (400 mA)
Rated impulse withstand voltage Uimp
Minimum operating current Im
Operating current Ie400 mA
No-load current I0approx. 2.4 mA (24V)
noticeProgrammable NO contact (Load switched with reflection / light-operated) or NC contact (Load not switched with reflection / dark-operated)
Programmable by repositioning the plug-in jumper at the terminal screws.
 
Outputs
 
Design of control outputPNP
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor46
- Height of sensor46
- Length of sensor118
- Diameter of sensorM30
 
notice
 
Instead of nuts, a mounting clamp can be provided.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 16.02.2019 - 14:14:31h Kasbase 3.3.0.F.64I