Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Safety light barriers  ->  SLB 400  ->  SLB 400-R50-21P Receiver
 Add Product to the basket. 
SLB 400-R50-21P Receiver
• NOTICE: Not available! (Replacement: SLB450)
• Range 15 m
• connector plug can be rotated

 
 
Ordering details
 
Product type descriptionSLB 400-R50-21P Empfänger
Article number101146816
EAN Code4030661286778
eCl@ss27-27-27-01
 
Approval
 
Approval
 
Global Properties
 
Permanent lightSLB 400
StandardsIEC/EN 61496
Compliance with the Directives (Y/N) Yes
Operating resource protection classNone
Safety type in accordance with IEC 61496-14
Materials
- Material of the housingsPlastic
Weight39
Range of the protection field15.000 mm
Min. object sizeØ 13 mm
Reaction time25 ms (Only in combination with safety monitoring module)
Wave length of the sensors880 nm
Angle of radiation± 2 °
Restart block (Y/N)Only in combination with safety monitoring module
Transmitter (Y/N)No
Receiver (Y/N)Yes
Monitoring function of downstream devices (Y/N)Only in combination with safety monitoring module
Prerequisite evaluation unitOnly in combination with safety monitoring module
Recommended safety-monitoring moduleSLB 400-C10-1R
 
Mechanical data
 
Design of electrical connectionConnector M12
- Wiring of the receiverconnector plug M12, 4-pole, can be rotated
Cable lengthmax. 100 m
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature0 °C
- Max. environmental temperature+60 °C
Storage and transport temperature
- Min. Storage and transport temperature−20 °C
- Max. Storage and transport temperature+80 °C
Protection classIP67 to IEC/EN 60529
 
Interface
 
Design of interface for security oriented communications.None
 
Electrical data
 
Voltage typeOnly in combination with safety monitoring module SLB 400-C
Switching voltage of the OSSD in high stateOnly in combination with safety monitoring module SLB 400-C
Rated operating voltage UeOnly in combination with safety monitoring module SLB 400-C
 
Outputs
 
Design of control outputOnly in combination with safety monitoring module SLB 400-C
Max. output current at secured outputOnly in combination with safety monitoring module SLB 400-C
 
Electrical data - Safety outputs
 
Number of secure semi-conductor outputsOnly in combination with safety monitoring module SLB 400-C
Number of secure outputs with contactOnly in combination with safety monitoring module SLB 400-C
 
Electrical data - Diagnostic output
 
Number of semi-conductor outputs with signaling functionOnly in combination with safety monitoring module SLB 400-C
Number of outputs with signaling function that already have a contactOnly in combination with safety monitoring module SLB 400-C
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
LED switching conditions display
- The integrated LEDs indicate the following operating states.
- Supply voltage UB
- soiling
- switching condition
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor17 mm
- Height of sensor50 mm
- Length of sensor63.5 mm

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.04.2019 - 13:52:58h Kasbase 3.3.0.F.64I