Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
 Add Product to the basket. 
AZ 16-03ZI-B1-1747 WITH MAGNETIC LATCH
• Thermoplastic enclosure
• Individual coding
• Coding level "High" according to ISO 14119
• 52 mm x 90 mm x 30 mm
• Long life
• Double-insulated
• Large wiring compartment
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• Slotted holes for adjustment, circular holes for location
• For play-free interlocking of light guards
• The magnetic latch can be easily fitted in any actuating plane
• 3 cable entries M 16 x 1.5

 
 
Ordering details
 
Product type descriptionAZ 16-03ZI-B1-1747 MIT HAFTMAGNET - Ordering suffix
Article number101145140
EAN Code
eCl@ss27-27-26-02
 
Approval
 
Approval BG
USA/CAN
 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightAZ 16ZI
StandardsEN 60947-5-1, BG-GS-ET-15
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the contactsSilver
Housing coatingNone
 
Mechanical data
 
Design of electrical connectionScrew connection
Cable section
- Min. Cable section0,75
- Max. Cable section2.5
Design of actuatorsstraight, rigid
Mechanical life> 1.000.000 operations
noticeAll indications about the cable section are including the conductor ferrules.
With ejection force (Y/N)Yes
Latching force30 N
Positive break force30
positive break travel8 mm
Actuating speedmax. 2 m/s
Minimum actuating radius250 mm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−30 °C
- Max. environmental temperature+80 °C
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementOpener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts0
Number of safety contacts3
Rated impulse withstand voltage Uimp6 kV
Rated insulation voltage Ui500 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 230 V / 4 A,
DC-13: 24 V / 4 A
Max. fuse rating6 A gG D-fuse
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor52 mm
- Height of sensor90
- Length of sensor30 mm
 
notice
 
Minimum actuating radius on hinged guards 250 mm
The axis of the hinge should be 5 mm above the top edge of the safety switch and in the same plane
The actuator is not available separately.
 
Included in delivery
 
Individually coded actuator
tamperproof screws
Slot sealing plugs
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZ 16-03ZI-B1-1747 WITH MAGNETIC LATCH-1762
...-1762 Versions with M5 nuts
For front mounting of safety switch, e.g. on sheet-steel covers
Cannot be retrofitted

...-1637 0,3 µm gold-plated contacts

...-M20 cable entries M20


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 23.04.2019 - 10:45:43h Kasbase 3.3.0.F.64I