Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Thermoplastic enclosure
• Double-insulated
• Long life
• 30 mm x 60 mm x 30 mm
• Particularly suitable for sliding doors
• Small body
• Individual coding
• Coding level "High" according to ISO 14119
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• 8 actuating planes
• Slot sealing plug included
• Connector M12 x 1, 4-pole

Ordering details
Product type descriptionAZ 17-02ZI-ST-B1 - Ordering suffix
Article number101144078
EAN Code4030661130781
Approval BG
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
Global Properties
Permanent lightAZ 17ZI
StandardsEN 60947-5-1, BG-GS-ET-15
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the actuatorStainless steel
- Material of the contactsSilver
Housing coatingNone
Mechanical data
Design of electrical connectionConnector M12
Mechanical life> 1.000.000 operations
higher Latching force (Y/N)No
Latching force5
Positive break force17 N
positive break travel11 mm
Max. Actuating speed2 m/s
Ambient conditions
Ambient temperature
- Min. environmental temperature−30 °C
- Max. environmental temperature+80 °C
Protection classIP67 to IEC/EN 60529
Electrical data
Design of control elementOpener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts0
Number of safety contacts2
Supply voltage
- Min. supply voltage
- Max. supply voltage230 V
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 230 V / 4 A
DC-13: 24 V / 4 A
Max. fuse rating6 A gG D-fuse
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor30
- Height of sensor85
- Length of sensor30
The axis of the hinge should be 10 mm above the top edge of the safety switch and in the same plane
The actuator is not available separately.
On hinged guards, minimum actuating radius at 90° to the plane of the actuator 140 mm
minimum actuating radius on hinged guards in line with the plane of the actuator 200 mm
Included in delivery
Not available as spare part
Included in delivery
• Individually coded actuator
• tamperproof screws
• Slot sealing plugs

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact
Switch travel diagram

Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Ordering suffix
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZ 17-02ZI-ST-B1-2243
...-2243 Cable output: front

...-2243 -1 Cable output: rear

...-1637 0,3 µm gold-plated contacts

...-6m Cable length 6 Meter

...-5m Cable length 5 Meter

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 22.09.2019 - 18:29:09h Kasbase 3.3.0.F.64I