Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Solenoid interlock  ->  AZM 170I  ->  AZM 170i-B1  ->  AZM 170-11ZRIA-B1 24 VAC/DC
 Add Product to the basket. 
AZM 170-11ZRIA-B1 24 VAC/DC
• Double-insulated
• Individual coding
• Coding level "High" according to ISO 14119
• 90 mm x 84 mm x 30 mm
• Compact design
• Interlock with protection against incorrect locking.
• Long life
• High holding force
• 1 Cable entry M 20 x 1.5
• Particularly suitable for sliding doors
• IDC method of termination
• Manual release

 
 
Ordering details
 
Product type descriptionAZM 170-11ZRIA-B1 24 VAC/DC - Ordering suffix
Article number101140799
EAN Code4030661119878
eCl@ss27-27-26-03
 
Approval
 
Approval BG
USA/CAN
CCC
EAC
 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightAZM 170I
StandardsEN 60947-5-1, BG-GS-ET-19
Compliance with the Directives (Y/N) Yes
Number of actuating directions2
Active principleelectromechanical
- Individual coding
- Coding level "High" according to ISO 14119
Duty cycle EDMagnet 100 %
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the actuatorStainless steel
- Material of the contactsSilver
Housing coatingNone
Weight310
 
Mechanical data
 
Design of electrical connectionIDC method of termination
Cable section
- Min. Cable section1 x 0,75
- Max. Cable section1 x 1.0, flexible
Mechanical life> 1.000.000 operations
Emergency unlocking device (Y/N)No
Manual release (Y/N)Yes
- bottom
Emergency release (Y/N)No
Latching force30
Positive break force8.5
positive break travel11 mm
Clamping force F1000 N
Max. Actuating speed2 m/s
Minimum actuating radius140 mm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25 °C
- Max. environmental temperature+60 °C
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO), Opener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts1
Number of safety contacts1
Power to unlockNo
Power to lockYes
Rated control voltage Us24 VAC/DC
Power consumptionmax. 10 W
Power consumptionmax. 10 W
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 230 V / 4 A
Max. fuse rating6 A gG D-fuse
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Miscellaneous data
 
Applications sliding safety guard,
removable guard,
hinged safety guard
 
Dimensions
 
Dimensions of the sensor
- Width of sensor90
- Height of sensor84
- Length of sensor30 mm
 
notice
 
On hinged guards, minimum actuating radius at 90° to the plane of the actuator 140 mm
minimum actuating radius on hinged guards in line with the plane of the actuator 200 mm
The actuator is not available separately.
The axis of the hinge should be 10 mm above the top edge of the safety switch and in the same plane
Manual release
• For manual release using M5 triangular key, available as accessory
This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
 
Included in delivery
 
Included in delivery
• Individually coded actuator
• tamperproof screws
• Slot sealing plugs
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZM 170-11ZRIA-B1 24 VAC/DC-1637
...-1637 0,3 µm gold-plated contacts


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.02.2019 - 17:09:20h Kasbase 3.3.0.F.64I