Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
Home ->
Safety light barriers  ->  SLB 200  ->  SLB 200-E31-21 Transmitter
 Add Product to the basket. 
SLB 200-E31-21 Transmitter
• NOTICE: Not available! (Replacement: SLB240)
• Range 4 m

 
 
Ordering details
 
Product type descriptionSLB 200-E31-21 Sender
Article number101138921
EAN Code4030661281711
eCl@ss27-27-27-01
 
Approval
 
Approval TÜV
 
Global Properties
 
Permanent lightSLB 200
StandardsIEC/EN 61496
Compliance with the Directives (Y/N) Yes
Operating resource protection classNone
Safety type in accordance with IEC 61496-12
Materials
- Material of the housingsPlastic
Weight70
Range of the protection field4000 mm
Min. object sizeØ 9 mm
Reaction time30 ms (Only in combination with safety monitoring module)
Wave length of the sensors880 nm
Angle of radiation± 4 °
Restart block (Y/N)Only in combination with safety monitoring module
Transmitter (Y/N)Yes
Receiver (Y/N)No
Monitoring function of downstream devices (Y/N)Only in combination with safety monitoring module
Prerequisite evaluation unitOnly in combination with safety monitoring module
Recommended safety-monitoring moduleSLB 200-C04-1R
 
Mechanical data
 
Design of electrical connectionCable with connector M8
- Wiring of the transmittermale connector M8, 3-pole, with 10 cm cable
Cable lengthmax. 50 m
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−10 °C
- Max. environmental temperature+55 °C
Storage and transport temperature
- Min. Storage and transport temperature−20 °C
- Max. Storage and transport temperature+80 °C
Protection classIP67 to IEC/EN 60529
 
Interface
 
Design of interface for security oriented communications.None
 
Electrical data
 
Voltage typeOnly in combination with safety monitoring module SLB 200-C
Switching voltage of the OSSD in high stateOnly in combination with safety monitoring module SLB 200-C
Rated operating voltage UeOnly in combination with safety monitoring module SLB 200-C
 
Outputs
 
Design of control outputOnly in combination with safety monitoring module SLB 200-C
Max. output current at secured outputOnly in combination with safety monitoring module SLB 200-C
 
Electrical data - Safety outputs
 
Number of secure semi-conductor outputsOnly in combination with safety monitoring module SLB 200-C
Number of secure outputs with contactOnly in combination with safety monitoring module SLB 200-C
 
Electrical data - Diagnostic output
 
Number of semi-conductor outputs with signaling functionOnly in combination with safety monitoring module SLB 200-C
Number of outputs with signaling function that already have a contactOnly in combination with safety monitoring module SLB 200-C
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
LED switching conditions display
- The integrated LEDs indicate the following operating states.
- Supply voltage UB
- soiling
- switching condition
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor30.8 mm
- Height of sensor50.3 mm
- Length of sensor18.8 mm

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.04.2019 - 12:31:53h Kasbase 3.3.0.F.64I