Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
VÖ  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  

Datasheet Datasheet

Click to enlarge image
• Design M30
• 1 Cable entry M 16 x 1.5
• Thermoplastic enclosure
• DC 3-wire
• Long design
• Double-insulated

 
 
Ordering details
 
Product type descriptionIFL 15-300L-10/01N - Ordering suffix
Article number101126974
EAN Code4030661278056
eCl@ss27-27-01-01
 
Approval
 
Approval CCC
 
Global Properties
 
Permanent lightIFL - M30
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
Materials
- Material of the housingsPlastic
- Material of the nutsPlastic
- Material of the washerperbunan®
- Material of the active surfacePlastic
Housing coatingNone
Housing construction formcylinder, thread
Weight70
 
Mechanical data
 
Design of electrical connectionScrew connection
Conductor with strain reliefNo
Cable section
- Min. Cable section
- Max. Cable section1 x 1.5
mechanical installation conditionsnot flush
Switch distance Sn15 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 36 max. 400 Ncm
• Wiring compartment
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO) or Opener (NC)
Number of wire3
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage60
Switch frequencyapprox. 100 HZ
Voltage drop Udapprox. 1.5 V (400 mA)
Operating current Ie400 mA
No-load current I0approx. 5.5 mA (24 V)
 
Outputs
 
Design of control outputNPN
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor118
- Diameter of sensorM30
 
notice
 
Instead of nuts, a mounting clamp can be provided.
Programmable by repositioning the plug-in jumper at the terminal screws
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: IFL 15-300L-10/01N-1665-1
...-1665-1 short-circuit and overload proof
Operating current Ie: 300 mA
Voltage drop Ud: approx. 1 V (300 mA)
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 17.09.2019 - 17:18:09h Kasbase 3.3.0.F.64I