Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Design Ø 20 mm
• Thermoplastic enclosure
• DC 4-wire
• Long design
• Double-insulated
• Connector

 
 
Ordering details
 
Product type descriptionIFL 10-200L-11STP - Ordering suffix
Article number101126739
EAN Code4030661050669
eCl@ss27-27-01-01
 
Approval
 
Approval CCC
 
Global Properties
 
Permanent lightIFL - Ø 20 mm
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
Materials
- Material of the housingsPlastic
- Material of the active surfacePlastic
- Material of the terminal fixingPlastic
Housing coatingNone
Housing construction formcylinder smooth
Weight58
 
Mechanical data
 
Design of electrical connectionConnector M18
Conductor with strain reliefNo
mechanical installation conditionsnot flush
Switch distance Sn10 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal
Pressure resistant (Y/N)No
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO) and Opener (NC) (antivalent)
Number of wire4
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage60
Switch frequencyapprox. 350 HZ
Voltage drop Udapprox. 1.5 V (400 mA)
Operating current Ie400 mA
No-load current I0approx. 5.5 mA (24 V)
 
Outputs
 
Design of control outputPNP
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor20
- Height of sensor20
- Length of sensor91
- Diameter of sensor20 mm
 
notice
 
Clamp H 20 is included in delivery
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: IFL 10-200L-11STP-1665-1
...-1665-1 short-circuit and overload proof
Operating current Ie: 300 mA
Voltage drop Ud: approx. 1 V (300 mA)


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.09.2019 - 05:29:58h Kasbase 3.3.0.F.64I