Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• left-hand model
• For very smal actuating radii in line with or at 90° to the plane of the actuator
• Thermoplastic enclosure
• Double-insulated
• Long life
• 30 mm x 60 mm x 30 mm
• Small body
• Individual coding
• Coding level "High" according to ISO 14119
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• 8 actuating planes
• Slot sealing plug included
• cable gland M16

 
 
Ordering details
 
Product type descriptionAZ 17-02ZI-B6L - Ordering suffix
Article number101122858
EAN Code4030661049779
eCl@ss27-27-26-02
 
Approval
 
Approval BG
USA/CAN
 
Classification
 
StandardsEN ISO 13849-1
B10d Normally-closed contact (NC)2.000.000
Mission time20 Years
notice
 
Global Properties
 
Permanent lightAZ 17ZI
StandardsEN 60947-5-1, BG-GS-ET-15
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Material of the actuatorStainless steel
- Material of the contactsSilver
Housing coatingNone
Weight100
 
Mechanical data
 
Design of electrical connectionIDC method of termination
Cable section
- Min. Cable section1 x 0,75
- Max. Cable section1 x 1.0, flexible
Mechanical life> 1.000.000 operations
higher Latching force (Y/N)No
Latching force5
Positive break force17 N
positive break travel11 mm
Max. Actuating speed2 m/s
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−30 °C
- Max. environmental temperature+80 °C
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementOpener (NC)
Switching principleCreep circuit element
Number of auxiliary contacts0
Number of safety contacts2
Supply voltage
- Min. supply voltage
- Max. supply voltage230 V
Rated impulse withstand voltage Uimp4 kV
Rated insulation voltage Ui250 V
Thermal test current Ithe10 A
Utilisation categoryAC-15: 230 V / 4 A
DC-13: 24 V / 4 A
Max. fuse rating6 A gG D-fuse
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor30
- Height of sensor85
- Length of sensor30
 
notice
 
Actuating radius adjustable, minimum 50 mm, using an hexagonal key wrench 2 mm A/F (a and b)
The axis of the hinge should be 11 mm above the top edge of the safety switch and in the same plane
The actuator is not available separately.
This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
 
Included in delivery
 
Not available as spare part
Included in delivery
• Individually coded actuator
• tamperproof screws
• Slot sealing plugs
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact
 
Switch travel diagram
 


Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
 
Ordering suffix
 
The applicable ordering suffix is added at the end of the part number of the safety switch.
Order example: AZ 17-02ZI-B6L-2243
...-2243 Cable output: front

...-2243 -1 Cable output: rear

...-1637 0,3 µm gold-plated contacts

...-6m Cable length 6 Meter

...-5m Cable length 5 Meter


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 16.06.2019 - 20:20:02h Kasbase 3.3.0.F.64I