Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Metal enclosure
• DC 3-wire
• miniature body
• Connector M8

 
 
Ordering details
 
Product type descriptionIFL 2-8M-01ST2N
Article number101117679
EAN Code4030661047485
eCl@ss27-27-01-01
 
Global Properties
 
Permanent lightIFL - M8
Operating resource protection classNone
Materials
- Material of the housingsBrass
- Material of the nutsBrass
- Material of the active surfacePlastic
Housing coatingnickel-plated
Weight40
 
Mechanical data
 
Design of electrical connectionConnector M8
Conductor with strain reliefNo
mechanical installation conditionsflush
Switch distance Sn2 mm
Protection circuitinductive interference protection, Protection against polarity reversal, short-circuit and overload proof
Tightening torque for nutsA/F 13 max. 600 Ncm
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
 
Electrical data
 
Design of control elementOpener (NC)
Number of wire3
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage30
Switch frequencyapprox. 3000 HZ
Voltage drop Udapprox. 1.2 V (200 mA)
Operating current Ie200 mA
No-load current I0approx. 3.4 mA (24 V)
 
Outputs
 
Design of control outputNPN
 
Dimensions
 
Dimensions of the sensor
- Length of sensor54
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 22.09.2019 - 01:33:31h Kasbase 3.3.0.F.64I