Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Design M 18 x 1
• Metal enclosure
• DC 3-wire
• Connector M12

 
 
Ordering details
 
Product type descriptionIFL 5-18-10STP-2033
Article number101115291
EAN Code4030661008950
eCl@ss27-27-01-01
 
Global Properties
 
Permanent lightIFL - M18
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classNone
Materials
- Material of the housingsStainless steel
- Material of the nutsStainless steel
- Material of the active surfacePlastic
Housing coatingNone
Housing construction formcylinder, thread
Weight49
 
Mechanical data
 
Design of electrical connectionConnector M12
Conductor with strain reliefNo
mechanical installation conditionsflush
Switch distance Sn5 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal, short-circuit and overload proof
Pressure resistant (Y/N)No
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of wire3
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage30
Switch frequencyapprox. 600 HZ
Voltage drop Udapprox. 1.2 V (200 mA)
Operating current Ie200 mA
No-load current I0approx. 3 mA (24 V)
 
Outputs
 
Design of control outputPNP
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor71.4
- Diameter of sensorM18
 
notice
 
Instead of nuts, a mounting clamp can be provided.
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 26.06.2019 - 20:08:31h Kasbase 3.3.0.F.64I