Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Non-contact principle
• Enclosure with mounting slots
• Actuation from front
• 5 reed contacts
• Long life
• LED switching conditions display
• connector
• Thermoplastic enclosure
• Reed-contact to clip-in, on-location assembly

 
Preferred typ
 
Ordering details
 
Product type descriptionBN 85-5
Article number101110853
EAN Code4030661050041
eCl@ss27-27-01-04
 
Approval
 
Approval-
 
Global Properties
 
Permanent lightBN 85-5
Standards-
Compliance with the Directives (Y/N) Yes
suitable for elevators (Y/N)Yes
MountingEnclosure with mounting slots
Active principleMagnetic drive
Materials
- Material of the housingsPlastic, glass-fibre reinforced thermoplastic
Housing construction formrectangular
Weight136
Recommended actuatorBP 7
- Lift switchgearBP 7
 
Mechanical data
 
Design of electrical connectionconnector, 10-pole
Mechanical life1.000.000.000 operations
Electrical lifetime500.000.000 operations
Actuating planesfront side
Switch distance1 … 14
- noticeThe specifications with regard to the switching distances apply to the actuation of the individually mounted devices without ferromagnetic influence. Any change of the
distance, positive either negative, is possible due to ferromagnetic interference. When multiple actuating magnets are used, the mutual
interference must be observed.
Type of actuationMagnet
restistance to shock60 g, on sine wave oscillation
Latching (Y/N)Yes
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−10
- Max. environmental temperature+75
Protection classIP30 to IEC/EN 60529
 
Electrical data
 
Design of control elementbistable contact
Number of snap-in contacts1…5
Switching time - Close2
Switching time - Open0,07
Dielectric strength400
Switching voltage12…60
Switching current1 A
Switching capacity30
 
Outputs
 
Design of control outputReed contakts
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor65
- Height of sensor20
- Length of sensor140
 
notice
 
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
 
Included in delivery
 
Actuators must be ordered separately.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 18.02.2019 - 02:55:12h Kasbase 3.3.0.F.64I