Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
• Design M30
• 1 Cable entry M 16 x 1.5
• Thermoplastic enclosure
• DC 2-wire
• Double-insulated

 
Preferred typ
 
Ordering details
 
Product type descriptionIFL 15-300-10/01D
Article number101110280
EAN Code4030661086774
eCl@ss27-27-01-01
 
Approval
 
Approval CCC
 
Global Properties
 
Permanent lightIFL - M30
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
Materials
- Material of the housingsPlastic
- Material of the nutsPlastic
- Material of the washerperbunan®
- Material of the active surfacePlastic
Housing coatingNone
Housing construction formcylinder, thread
Weight70
 
Mechanical data
 
Design of electrical connectionScrew connection
Conductor with strain reliefNo
Cable section
- Min. Cable section
- Max. Cable section1 x 1.5
mechanical installation conditionsnot flush
Switch distance Sn15 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, short-circuit and overload proof, Protection against polarity reversal
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 36 max. 400 Ncm
• Wiring compartment
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP65 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO) or Opener (NC)
Number of wire2
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage40
Switch frequencyapprox. 100 HZ
Voltage drop Ud≤ 6 V (200 mA), ≤ 5.5 V (100 mA)
Residual current Irapprox. 0,5 mA
Minimum operating current Im5 mA
Operating current Ie200 mA
 
Outputs
 
Design of control outputTwo-wire
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Length of sensor118
- Diameter of sensorM30
 
notice
 
Instead of nuts, a mounting clamp can be provided.
Programmable by repositioning the plug-in jumper at the terminal screws
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 15.09.2019 - 20:06:09h Kasbase 3.3.0.F.64I