Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
  
NOTICE: Not available!
• Design Ø 4 mm
• Metal enclosure
• DC 3-wire
• Connector

 
 
Ordering details
 
Product type descriptionIFL 0,8-4-10ST2P
NOTICE: Not available!
Article number101108240
EAN Code4030661048697
eCl@ss27-27-01-01
 
Global Properties
 
Permanent lightIFL Ø 4 mm
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classNone
Materials
- Material of the housingsStainless steel
- Material of the terminal fixingPlastic
Housing coatingNone
Housing construction formcylinder smooth
Weight8
 
Mechanical data
 
Design of electrical connectionConnector M8
Conductor with strain reliefNo
mechanical installation conditionsflush
Switch distance Sn0,8 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal, short-circuit and overload proof (pulsed)
Pressure resistant (Y/N)No
 
Ambient conditions
 
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
 
Electrical data
 
Design of control elementNormally open contact (NO)
Number of wire3
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage7
- Max. supply voltage35
Switch frequencyapprox. 1000 HZ
Voltage drop Ud≤ 2 V (100 mA)
Operating current Ie100 mA
No-load current I0< 2.5 mA
 
Outputs
 
Design of control outputPNP
 
LED switching conditions display
 
LED switching conditions display (Y/N)Yes
- yellow LED
 
ATEX
 
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
 
Dimensions
 
Dimensions of the sensor
- Width of sensor4
- Height of sensor4
- Length of sensor49
- Diameter of sensor4 mm
 
notice
 
Clamp H 4 is included in delivery
 
Diagram
 


Note Diagram
  positive break NC contact
  active
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.02.2019 - 16:55:52h Kasbase 3.3.0.F.64I