Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Design 250
• Thermoplastic enclosure
• DC 2-wire
• Double-insulated

Preferred typ
Ordering details
Product type descriptionIFL 4-250-10D
Article number101107015
EAN Code4030661048505
Approval CCC
Global Properties
Permanent lightIFL - 250
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
- Material of the housingsPlastic
- Material of the cable mantlePVC
- Material of the active surfacePlastic
Housing construction formBlock
Mechanical data
Design of electrical connectionCable H03VV-F
Cable length2
Conductor with strain reliefNo
Conductors2 x 0,5
mechanical installation conditionsnot flush
Switch distance Sn4 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, short-circuit and overload proof, Protection against polarity reversal
Pressure resistant (Y/N)No
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
Electrical data
Design of control elementNormally open contact (NO)
Number of wire2
Voltage typeDC, direct current
Supply voltage UB
- Min. supply voltage10
- Max. supply voltage40
Switch frequencyapprox. 1000 HZ
Voltage drop Ud≤ 6 V (200 mA), ≤ 5.5 V (100 mA)
Residual current Irapprox. 0,5 mA
Minimum operating current Im5 mA
Operating current Ie200 mA
Design of control outputTwo-wire
LED switching conditions display
LED switching conditions display (Y/N)Yes
- yellow LED
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Width of sensor40
- Height of sensor25
- Length of sensor12
with 2 screws M3 x 6 for rear mounting

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 20.09.2019 - 06:02:39h Kasbase 3.3.0.F.64I