Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
inductive interference protection, Protection against polarity reversal
Pressure resistant (Y/N)
No
• Wiring compartment
Ambient conditions
Ambient temperature
- Min. environmental temperature
−25
- Max. environmental temperature
+70
Protection class
IP65 to IEC/EN 60529
Electrical data
Design of control element
Normally open contact (NO) or Opener (NC)
Number of wire
2
Voltage type
DC, direct current / AC, alternating current
Supply voltage UB
- Min. supply voltage
15
- Max. supply voltage
250
Switch frequency
approx. 15 HZ
Voltage drop Ud
approx. 4 V (300 mA)
Operating current Ie
300 mA
No-load current I0
approx. 0,3 mA (24 V)
Outputs
Design of control output
Two-wire
LED switching conditions display
LED switching conditions display (Y/N)
Yes
- yellow LED
ATEX
Explosion protection categories for gases
None
Explosion protected category for dusts
None
Dimensions
Dimensions of the sensor
- Width of sensor
40
- Height of sensor
112
- Length of sensor
40
notice
By repositioning the switch 5 different actuating directions can be selected. The selected actuating direction can be marked with a sticker.
Programmable by repositioning the plug-in jumper at the terminal screws
Diagram
Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
18.02.2019 -
21:28:40h Kasbase 3.3.0.F.64I