Notes Switch travel diagram Contact closed Contact open Setting range Break point Positive opening sequence/- angle VS adjustable range of NO contact VÖ adjustable range of NC contact N after travel
inductive interference protection, Protection against polarity reversal, short-circuit and overload proof
Pressure resistant (Y/N)
No
Tightening torque for nuts
A/F 17 max. 1500 Ncm
- in the shell core area: max. 500 Ncm
Ambient conditions
Ambient temperature
- Min. environmental temperature
−25
- Max. environmental temperature
+70
Protection class
IP67 to IEC/EN 60529
Electrical data
Design of control element
Opener (NC)
Number of wire
3
Voltage type
DC, direct current
Supply voltage
- Min. supply voltage
10
- Max. supply voltage
30
Switch frequency
approx. 500 HZ
Voltage drop Ud
approx. 1.2 V (200 mA)
Operating current Ie
200 mA
No-load current I0
approx. 3 mA (24 V)
Outputs
Design of control output
PNP
LED switching conditions display
LED switching conditions display (Y/N)
Yes
- yellow LED
ATEX
Explosion protection categories for gases
None
Explosion protected category for dusts
None
Dimensions
Dimensions of the sensor
- Length of sensor
31.5
- Diameter of sensor
M12
Diagram
Note Diagram positive break NC contact active no active Normally-open contact Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
20.02.2019 -
22:28:30h Kasbase 3.3.0.F.64I