| |
|
Ordering details |
|
Product type description | IFL 10-180-10ST |
Article number | 101092427 |
EAN Code | 4030661024202 |
eCl@ss | 27-27-01-01 |
|
Approval |
|
Approval | CCC |
|
Global Properties |
|
Permanent light | IFL - M18 |
Standards | IEC/EN 60947-5-2; DIN VDE 0660-208 |
Compliance with the Directives (Y/N)  | Yes |
Operating resource protection class | Protection class 2 |
Materials |
- Material of the housings | Plastic |
- Material of the nuts | Plastic |
- Material of the washer | perbunan® |
- Material of the active surface | Plastic |
Housing coating | None |
Housing construction form | cylinder, thread |
Weight | 30 |
|
Mechanical data |
|
Design of electrical connection | Connector M18 |
Conductor with strain relief | No |
mechanical installation conditions | not flush |
Switch distance Sn | 10 mm |
Reduction factor 1 met (Y/N) | No |
Protection circuit | inductive interference protection |
Pressure resistant (Y/N) | No |
Tightening torque for nuts | A/F 24 max. 300 Ncm |
|
Ambient conditions |
|
Ambient temperature |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +70 |
Protection class | IP67 to IEC/EN 60529 |
|
Electrical data |
|
Design of control element | Normally open contact (NO) |
Number of wire | 2 |
Voltage type | AC, alternating current |
Supply voltage UB |
- Min. supply voltage | 15 |
- Max. supply voltage | 250 |
Rated supply frequency | 45 … 65 |
Switch frequency | approx. 10 HZ |
Voltage drop Ud | approx. 4.5 V (250 V / 200 mA) |
Rated impulse withstand voltage Uimp | 4 kV |
Residual current Ir | 1 mA |
Minimum operating current Im | 10 mA |
Operating current Ie | 500 mA |
|
Outputs |
|
Design of control output | Two-wire |
|
LED switching conditions display |
|
LED switching conditions display (Y/N) | Yes |
- yellow LED |
|
ATEX |
|
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
|
Dimensions |
|
Dimensions of the sensor |
- Length of sensor | 91 |
- Diameter of sensor | M18 |
|
notice |
|
Instead of nuts, a mounting clamp can be provided. |
|
Diagram |
|

Note Diagram
positive break NC contact
active
no active
Normally-open contact
Normally-closed contact |
|
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal The data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am
20.02.2019 -
23:00:00h Kasbase 3.3.0.F.64I |