Notes Switch travel diagram
  Contact closed
  Contact open
  Setting range
  Break point
  Positive opening sequence/- angle
VS  adjustable range of NO contact
  adjustable range of NC contact
N   after travel
Deutsch  English  Francais  Nederlands  Italiano  Español  Português  Suomi  Svenska  Norsk  Dansk  Polska  日本語  Türkiye  中文  Português-br  
• Design M12
• Thermoplastic enclosure
• DC 3-wire
• Double-insulated
• miniature body

Preferred typ
Ordering details
Product type descriptionIFL 4-120M-10P
Article number101084076
EAN Code4030661019086
Global Properties
Permanent lightIFL - M 12
StandardsIEC/EN 60947-5-2; DIN VDE 0660-208
Compliance with the Directives (Y/N) Yes
Operating resource protection classProtection class 2
- Material of the housingsPlastic
- Material of the nutsPlastic
- Material of the washerperbunan®
- Material of the cable mantlePVC
- Material of the active surfacePlastic
Housing coating
Housing construction formcylinder, thread
Mechanical data
Design of electrical connectionCable
Cable length2
Conductor with strain reliefNo
Conductors3 x 0,14
mechanical installation conditionsnot flush
Switch distance Sn4 mm
Reduction factor 1 met (Y/N)No
Protection circuitinductive interference protection, Protection against polarity reversal, short-circuit and overload proof
Pressure resistant (Y/N)No
Tightening torque for nutsA/F 17 max. 90 Ncm
Ambient conditions
Ambient temperature
- Min. environmental temperature−25
- Max. environmental temperature+70
Protection classIP67 to IEC/EN 60529
Electrical data
Design of control elementNormally open contact (NO)
Number of wire3
Voltage typeDC, direct current
Supply voltage
- Min. supply voltage10
- Max. supply voltage30
Switch frequencyapprox. 1000 HZ
Voltage drop Udapprox. 1.2 V (200 mA)
Operating current Ie200 mA
No-load current I0approx. 3 mA (24 V)
Design of control outputPNP
LED switching conditions display
LED switching conditions display (Y/N)Yes
- yellow LED
Explosion protection categories for gasesNone
Explosion protected category for dustsNone
Dimensions of the sensor
- Length of sensor32.6
- Diameter of sensorM12

Note Diagram
  positive break NC contact
  no active
  Normally-open contact
  Normally-closed contact

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D-42279 Wuppertal
The data and values have been checked throroughly. Technical modifications and errors excepted.
Generiert am 22.04.2019 - 16:09:22h Kasbase 3.3.0.F.64I